Hexagon Die Nut DIN 382 HSS - UNx8 1.1/2 x 8 | VÖLKEL
Hexagon Die Nut DIN 382 HSS - UNx8 1.1/2 x 8
You use this tool in threading related work where correct alignment and a matching standard are required in the designation UNx8 1.1/2 x 8.
Selection and handling depend on the interface and execution stated in the product name and on the workpiece material used in your process.
- Support common threading workflows in fabrication and maintenance settings depending on execution
- Use with matching holders and interfaces stated in the product name
- Clamp the die in a matching round die holder or die stock and keep the setup square to the workpiece axis
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: thread cutting, re tapping, and thread cleaning depending on condition
Note Select the variant that matches the thread standard, hand direction, and tolerance requirements stated in your drawing.
- Supports secure handling in threading related processes depending on execution
- Helps you keep alignment and consistent tool engagement
- Simple setup for workshop and maintenance operations
- Design supports repeatable results when used with a matching interface
Drawbacks
- Limited performance in very hard, abrasive, or heat treated materials depending on tool grade and coating
- Not suitable for high volume production where cycle time and tool life must be maximized
- Confirm the product execution stated in the product name
- Prepare the workplace and ensure the workpiece is secured
- Mount the tool in a suitable holder depending on execution
- Align the tool carefully before you start
- Use a suitable lubricant if your process requires it
- Carry out the operation with steady control
- Clean the tool and protect it for storage
- Tool type: Tool
- Standard: DIN 382 HSS - UN
- Material: HSS
- Tolerance: GO and NO GO limits per ISO 1502
- Thread designation: UNx8 1.1/2 x 8
- How do you confirm compatibility before use?
- Match the interface and execution stated in the product name to your tool and holder setup. If any parameter is unclear, verify it in your documentation before you start.
- What is a common setup check?
- Clean contact surfaces and ensure the tool is seated correctly. Stable clamping reduces alignment errors and uneven load.
- How do you maintain the product?
- Remove debris, wipe clean, and apply corrosion protection if needed. Storage conditions in workshops can strongly influence service life.
- When should you change the tool or accessory?
- Change it when clamping becomes unreliable, guidance is no longer precise, or visible damage appears. Continued use can compromise process stability.
- Where do you find selection information?
- Use the product name to match your drawing and then consult the relevant catalog for tables and execution notes.
- Where can you find additional technical information for this tool type?
- Use the technical information document for background on geometry terms, selection logic, and handling notes. Technical information hexagon die nuts as PDF
- What is a sensible inspection method after cutting?
- Use the inspection method defined in your quality plan and check fit and surface. If you see tearing or tight fit, review alignment, lubrication, and tool condition.
- Where can you find the full VÖLKEL catalog for selection support?
- Use the catalog for the complete range, execution variants, and reference tables. VD 23 catalog as PDF
Do you need help selecting or using the product?
Use the contact form.
