Hand Tap Rougher DIN 2181 HSS-G - M 5.5 x 0.5 | VÖLKEL
Hand Tap Rougher DIN 2181 HSS-G - M 5.5 x 0.5
Use this threading tool when you want a reliable thread form on components in mechanical engineering and metal fabrication.
Select the thread designation stated in the product name and match it to the workpiece thread system and tolerance requirements.
- Cut internal threads in workshop work where manual control is preferred over machine feed.
- Use for repair, rework, and short series operations where setup time needs to stay low.
- Apply to through holes and blind holes when the correct tap type is selected for the hole condition.
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: thread cutting, re tapping, and thread cleaning depending on condition
Note Select the variant stated in the product name and keep preparation and inspection steps aligned with your process documentation.
- Supports reliable thread engagement when the tool is guided straight and lubricated appropriately.
- Helps you achieve consistent assembly feel across repeated operations in shop workflows.
- Supports rework tasks where restoring thread quality prevents scrap.
- Works well in maintenance routines when you need predictable handling and tool response.
- Enables clear process planning when the tool type matches hole condition and material.
Drawbacks
- Tool performance depends on workpiece material and condition, so you must select a suitable execution for the application.
- Not designed for extreme high volume production without process control and dedicated machine tooling.
- Prepare the workpiece thread area according to your process plan and remove burrs.
- Align the tool square to the hole axis or shaft axis before you start cutting.
- Apply a suitable cutting lubricant to support smooth cutting action.
- Drive the tool forward with steady rotation while you keep alignment stable.
- Reverse the tool and remove chips from the flutes and the work area.
- Clean the thread, then check assembly feel with a matching fastener or gauge.
- Clean the tool and store it protected from impact and corrosion.
- 1 piece tap, DIN execution as stated in the product name
- Tool type: Hand tap
- Standard reference: DIN 2181
- Tool material: HSS-G
- Thread designation: M 5.5 x 0.5
- Thread system: Metric thread
- How do you choose between hand tapping and machine tapping?
- Choose hand tapping when you need close control and low setup effort, and choose machine tapping when you need repeatability and stable feed control.
- Can you cut the thread size M 5.5 x 0.5 with this tool?
- Use the thread designation in the product name to match the required thread, then follow your shop procedure for hole preparation, lubrication, and inspection.
- What causes a rough thread surface after cutting?
- Common causes include misalignment, unsuitable lubricant, tool wear, or chips trapped in the flutes, so focus on straight guidance and clean working conditions.
- How do you extend tool life in routine use?
- Use a suitable lubricant, avoid side load, keep cutting edges protected from impact, and replace the tool when cutting forces or thread quality change.
- How do you confirm thread quality without measuring equipment?
- You can check assembly feel with a matching fastener and look for smooth engagement, then use a gauge if your process requires documented conformity.
- Where do you find technical background for this execution?
- Use the technical information for selection and process setup guidance. Technical information hand taps as PDF
- How do you keep the process stable in repeated operations?
- Use consistent preparation, stable guidance, and a clean working area so results remain comparable across batches.
- Where do you find the complete catalog context for this product class?
- For additional product and system information, use the catalog. VD 23 catalog as PDF
Do you need help selecting or using the product?
Use the contact form.
