HexTap - Double ended tap + hexagon die nuts (set of 16 pcs.) G (BSP) 1/8 – 1.1/2

• Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
• Select the tool by the thread system, size, and form stated in the product name before the job begins.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: thread cutting, re tapping, and thread cleaning depending on condition
• Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.

Note Confirm thread designation, holder concept, and workpiece condition before you start the operation.

• Internal and external thread tools are combined in one service oriented set.
• Standard hand tool drive concepts support work in awkward access areas.
• Matched sizes reduce the risk of mixing internal and external thread tools.
• Case based storage helps transport and job readiness.

• Manual service tools are not a substitute for high performance production threading systems.
• It is intended for service oriented work, not for high speed production cycles.

1. Select the matching internal or external thread tool from the set according to the required thread size.
2. Choose the appropriate hand tool drive concept for the access situation and mount the tool securely.
3. Prepare the hole or outside diameter so the thread can start cleanly and square to the work axis.
4. Drive the selected HexTap tool with steady manual control and suitable lubrication for the material.
5. Inspect the thread after cutting or cleaning and repeat only if the condition of the existing thread requires it.
6. Clean the tool and return all components to the case so the set stays ready for the next service job.

• 1x Threading-Bit 1/4" HexTap S G (BSP) 1/8 (67870)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 1/4 (67871)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 3/8 (67872)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 1/2 (67873)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 3/4 (67874)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 1" (67875)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 1.1/4 (67876)

• 1x Double Ended Tap, Multi-Drive HexTap DS G (BSP) 1.1/2 (67877)

• 1x HSS Hexagon die nut G (BSP) 1/8 (25512)

• 1x HSS Hexagon die nut G (BSP) 1/4 (25514)

• 1x HSS Hexagon die nut G (BSP) 3/8 (25516)

• 1x HSS Hexagon die nut G (BSP) 1/2 (25518)

• 1x HSS Hexagon die nut G (BSP) 3/4 (25522)

• 1x HSS Hexagon die nut G (BSP) 1" (25526)

• 1x HSS Hexagon die nut G (BSP) 1.1/4 (25534)

• 1x HSS Hexagon die nut G (BSP) 1.1/2 (25542)

• Product type: HexTap set
• Thread system: BSP
• Included groups: hexagon die nuts

How do you choose the correct product variant?

Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.

How do you decide whether the product fits your process?

Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.

What should you inspect before the threading operation?

Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.

Where can you read more about the HexTap drive concept?

Technical information HexTap DS as PDF

Can you use this product for repair work as well as new threads?

In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.

Where can you find the full threading tools catalog?

VD 23 catalog as PDF

What is the main selection checkpoint after size matching?

After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or external thread condition.