Machine Tap WHITE RING JIS B-4430 Form C 39° Spiral Flute HSSE VAP - M 10 x 1.0
Item no.
91284
Regular price:
€20.40
in stock - more than 100 pieces available
Application
You use this machine tap to produce internal threads in a controlled machining process. The execution in the product name helps you match the tool to the thread system, hole type, and your production method.
You typically run the tool in a tapping chuck or a suitable collet holder with axial compensation if required. Process stability depends on correct lubrication, clean chip evacuation, and avoiding misalignment at entry.
Application
- Cutting of internal threads in steels and common engineering materials within the limits of the chosen execution
- Use for series work, repair tasks, and general machining in mechanical engineering and metal fabrication
- Suitable for through holes and blind holes depending on the geometry stated in the product name
- Use with a tapping chuck or suitable collet holder to keep axial alignment during the tapping cycle
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: thread cutting, re tapping, and thread cleaning depending on condition
Note Keep the tool clean and lightly oiled after use to prevent corrosion and to protect cutting edges.
Benefits
- Defined cutting geometry supports predictable thread form
- Clear variant identification via standard and form in the product name
- Suitable for workshop and series processes when lubrication and alignment are controlled
- Supports rework and maintenance tasks without changing the workpiece design
Drawbacks
- Tool life can drop in very hard or abrasive materials if the selected execution is not matched to the application
- Not suitable for high performance applications when process parameters are not optimised
Step by step
- Confirm the thread designation, standard, and execution in the product name against your drawing and material specification.
- Prepare the pre hole and entry chamfer according to your process specification and remove burrs from the opening.
- Clamp the tap in a tapping chuck or suitable collet holder and set up the cycle so feed stays synchronised with rotation.
- Apply a suitable cutting lubricant or coolant for the workpiece material and ensure the entry area is wet.
- Start the cut with the tool aligned to the hole axis and keep the alignment stable through the first turns or revolutions.
- Continue the pass while monitoring torque and remove the tool if chips accumulate and increase cutting resistance.
- Retract the tool, clean chips from the flutes, and inspect the thread before the part moves to the next operation.
Scope of supply
- 1 piece Machine Tap WHITE RING JIS B-4430 Form C 39° Spiral Flute HSSE VAP - M 10 x 1.0
Technical features
- Type: Machine tap
- Standard: JIS B-4430
- Thread system: ISO metric
- Execution: Form C
- Flute style: Spiral flute
- Helix angle: 39°
- Tool material: HSS
- Coating: VAP
- Tolerance class: ISO metric internal thread tolerance 6H
Frequently asked questions (FAQ)
- What should you check before you start tapping with this tool?
- You verify the thread designation shown in the product name and confirm that your pre hole preparation meets your internal process specification. You also check the workpiece material and choose a lubricant that prevents seizing.
- Which holder type do you typically use with this tap?
- You typically use a tapping chuck or a suitable collet holder so the tap runs concentrically and stays aligned. If your process needs axial compensation, you choose a holder that provides it.
- How do you reduce the risk of broken taps and damaged threads?
- You keep the tool aligned, use a suitable lubricant, and monitor torque so you can stop before overload. You also remove chips from the flutes and avoid starting on burrs or hard scale.
- Where can you find additional process notes for machine tapping?
- Use the PDF for consolidated notes on selection and handling. Technical information machine taps as PDF
- Do you need cutting lubricant or coolant for this tap?
- Yes, you use a lubricant or coolant matched to the workpiece material to reduce friction and to control heat. Stable lubrication also helps keep thread flank quality consistent.
- How do you maintain and store the tap after use?
- You clean chips from the flutes, dry the tool, and apply a light corrosion protection film. You store it so cutting edges are protected from contact and impact.
- Where can you find additional technical data and the full range?
- Use the catalog for overview tables and selection guidance. VD 23 catalog as PDF
Do you need help selecting or using the product?
Use the contact form.
In this category: Threading Tools
Related products: Machine Taps with coloured ring
Additional information
| Type of thread | metric-fine ISO-thread |
|---|---|
| Standard | JIS B-4430 |
| Form | Form C |
| Material | HSSE |
| Tolerance | OH2 |
| Size | M 10 x 1.0 |
| Overall length (L1) | 75 mm |
| Thread length (L2) | 16 mm |
| Core hole diameter (D1) | 9.0 mm |
| Shank diameter (D2) | 7.0 mm |
| Drive connector | 5.5 mm |
| EAN | 4022835912842 |
| Item number | 91284 |
| Type of flute | 39° Spiral Flute |
| Application | for blind holes |
| Thread standard | DIN 13 |
| Coating | VAP |
Recommended products
Skip product gallery
Matching tools in this size
