Skip to main content Skip to search Skip to main navigation
Application
Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1 (10 Pieces) | VÖLKEL

Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1 (10 Pieces)

This tool holder is used for the secure holding and controlled operation of taps when cutting internal threads. It is mainly used when the available working space is restricted and continuous rotary movement is not possible.

The integrated ratchet function enables short working movements with defined feed, allowing taps to be guided precisely even in hard-to-reach positions. Switching between right- and left-hand operation supports a structured workflow when cutting and retracting the tool.

Application

  • Drive taps in confined working areas where full rotation is not possible
  • Use the tool holder for securely clamping and guiding taps
  • Control changes of direction precisely via the ratchet function
  • Machine internal threads in assembly, maintenance, and repair situations
  • Process: manual or assisted drive depending on your tool holder and machine configuration
  • Use: thread cutting, reworking threads, and cleaning threads depending on the condition of the thread

Note Make sure that the tap is correctly clamped and that the tool is always guided in alignment with the hole.

Advantages

  • Ratchet mechanism enables work in limited swing spaces
  • Switchable between right- and left-hand operation for controlled movement sequences
  • Makes it easier to start and guide the tap
  • Suitable for maintenance, assembly, and servicing work
  • Supports even power transmission during manual thread cutting
Disadvantages
  • Only suitable to a limited extent for applications with very high torque requirements
  • Manual handling requires experience for consistent thread quality

Step by Step

  1. Clean the tool holder and the tap and check the holder for a proper fit. This ensures that no contamination impairs the clamping.
  2. Insert the tap into the holder and clamp it evenly until it is secure and free of play. Stable clamping is crucial for guidance.
  3. Set the desired rotation direction on the ratchet and check the function before starting. This helps avoid incorrect movements during the workflow.
  4. Align the tool holder exactly with the hole axis and begin with short, even movements. Keep the alignment constant to achieve clean thread geometry.
  5. If necessary, switch the rotation direction, retract the tap in a controlled manner, and then remove it. Clean the tool and holder after use.

Scope of Delivery

  • 10 pieces Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1

Technical Features

  • Design: Ratchet tool holder
  • Application range: Holding and operating taps
  • Function: Ratchet with switchable right- and left-hand operation
  • Version: No. 1
  • Use: Operating and holding tool for internal threads

Frequently Asked Questions (FAQ)

When is a tool holder with ratchet useful?
It is useful when you work in areas with restricted movement space and continuous rotary movement is not possible.

How do you set the correct rotation direction?
The rotation direction is set via the ratchet switching function and should be checked before starting work.

What is this tool holder used for?
It is used as a holder and drive tool for taps when cutting, reworking, or cleaning internal threads.

What does the designation No. 1 mean?
This designation identifies the version within the product range and serves for clear classification.

What should you pay attention to during use?
Clean alignment with the hole axis and stable clamping of the tap are crucial for a clean result.

Is the tool holder suitable for all taps?
Its use depends on the appropriate holder size and version. The holder must match the geometry of the tap being used.

Where can you find more information about threading tools?
VD 23 catalog as PDF

Do you need support with selection or application?
Use the contact form.

Additional information
Size No. 1
Length 85 mm
EAN 4022835100010
Varianten M 3 - M 10
Item number 10001
Packing unit (pcs.) 10
Application 2.4-5.5 mm (M3-10)
Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1 (10 Pieces) | VÖLKEL

Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1 (10 Pieces)

This tool holder is used for the secure holding and controlled operation of taps when cutting internal threads. It is mainly used when the available working space is restricted and continuous rotary movement is not possible.

The integrated ratchet function enables short working movements with defined feed, allowing taps to be guided precisely even in hard-to-reach positions. Switching between right- and left-hand operation supports a structured workflow when cutting and retracting the tool.

Application

  • Drive taps in confined working areas where full rotation is not possible
  • Use the tool holder for securely clamping and guiding taps
  • Control changes of direction precisely via the ratchet function
  • Machine internal threads in assembly, maintenance, and repair situations
  • Process: manual or assisted drive depending on your tool holder and machine configuration
  • Use: thread cutting, reworking threads, and cleaning threads depending on the condition of the thread

Note Make sure that the tap is correctly clamped and that the tool is always guided in alignment with the hole.

Advantages

  • Ratchet mechanism enables work in limited swing spaces
  • Switchable between right- and left-hand operation for controlled movement sequences
  • Makes it easier to start and guide the tap
  • Suitable for maintenance, assembly, and servicing work
  • Supports even power transmission during manual thread cutting
Disadvantages
  • Only suitable to a limited extent for applications with very high torque requirements
  • Manual handling requires experience for consistent thread quality

Step by Step

  1. Clean the tool holder and the tap and check the holder for a proper fit. This ensures that no contamination impairs the clamping.
  2. Insert the tap into the holder and clamp it evenly until it is secure and free of play. Stable clamping is crucial for guidance.
  3. Set the desired rotation direction on the ratchet and check the function before starting. This helps avoid incorrect movements during the workflow.
  4. Align the tool holder exactly with the hole axis and begin with short, even movements. Keep the alignment constant to achieve clean thread geometry.
  5. If necessary, switch the rotation direction, retract the tap in a controlled manner, and then remove it. Clean the tool and holder after use.

Scope of Delivery

  • 10 pieces Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1

Technical Features

  • Design: Ratchet tool holder
  • Application range: Holding and operating taps
  • Function: Ratchet with switchable right- and left-hand operation
  • Version: No. 1
  • Use: Operating and holding tool for internal threads

Frequently Asked Questions (FAQ)

When is a tool holder with ratchet useful?
It is useful when you work in areas with restricted movement space and continuous rotary movement is not possible.

How do you set the correct rotation direction?
The rotation direction is set via the ratchet switching function and should be checked before starting work.

What is this tool holder used for?
It is used as a holder and drive tool for taps when cutting, reworking, or cleaning internal threads.

What does the designation No. 1 mean?
This designation identifies the version within the product range and serves for clear classification.

What should you pay attention to during use?
Clean alignment with the hole axis and stable clamping of the tap are crucial for a clean result.

Is the tool holder suitable for all taps?
Its use depends on the appropriate holder size and version. The holder must match the geometry of the tap being used.

Where can you find more information about threading tools?
VD 23 catalog as PDF

Do you need support with selection or application?
Use the contact form.

Die visible through a larger die.
Application consulting
Always the perfect product for your application situation
Request consulting