Skip to main content Skip to search Skip to main navigation
Application
Tool Holder with Ratchet for Right- and Left-Hand Operation No. 2 (10 Pieces) | VÖLKEL

Tool Holder with Ratchet for Right- and Left-Hand Operation No. 2 (10 Pieces)

This tool holder with ratchet is used as an operating and holding tool for taps when the available swing space is limited. It enables controlled guidance of the tool even in installation situations where continuous rotary movement is not possible.

The ratchet function allows short, repeatable movements, making it possible to position and guide taps precisely. Switching between right- and left-hand operation supports the workflow when cutting and retracting the tool, especially during maintenance and assembly work.

Application

  • Drive taps in areas with limited swing space
  • Use the tool holder for secure fixing and guidance of the tap
  • Control direction changes precisely via the ratchet function
  • Machine internal threads in assembly, maintenance, and service applications
  • Process: manual or assisted drive depending on your tool holder and machine configuration
  • Use: thread cutting, reworking threads, and cleaning threads depending on the condition of the thread

Note Ensure clean alignment with the thread axis and secure fixing of the tool to guarantee even guidance.

Advantages

  • Ratchet mechanism allows work with short movements in limited space
  • Switchable for right- and left-hand operation for structured machining
  • Makes positioning and guiding taps easier
  • Suitable for maintenance, assembly, and rework on existing threads
  • Supports controlled power transmission during manual use
Disadvantages
  • Only suitable to a limited extent for applications with high torque requirements
  • Requires steady handling for even machining results

Step by Step

  1. Clean the tool holder and tap thoroughly and check the holder for a clean condition. This ensures that the tap can be clamped correctly.
  2. Insert the tap into the holder and fix it evenly until it sits securely and without play. Stable fixing is crucial for guidance.
  3. Set the desired rotation direction via the ratchet and check the function before use. This helps you avoid incorrect movements during the process.
  4. Align the tool holder exactly with the thread axis and begin with short, controlled movements. Keep the alignment constant to ensure clean thread guidance.
  5. If necessary, switch the rotation direction, guide the tap back in a controlled manner, and then remove it. Clean the tool after use.

Scope of Delivery

  • 10 pieces Tool Holder with Ratchet for Right- and Left-Hand Operation No. 2

Technical Features

  • Design: Tool holder with ratchet
  • Application range: Holding and operating taps
  • Function: Switchable right- and left-hand operation
  • Version: No. 2
  • Use: Holding and operating tool in thread cutting

Frequently Asked Questions (FAQ)

When is this tool holder useful?
It is useful when you need to use taps in areas with limited movement space and short working movements are required.

What does the designation No. 2 mean?
The designation describes the version within the product range and serves for clear identification.

Can you use it for right- and left-hand operation?
Yes, the integrated ratchet function allows switching between both rotation directions.

What should you pay attention to during use?
Ensure exact alignment with the thread axis and stable fixing of the tap to achieve clean results.

What work is the holder suitable for?
It is especially suitable for assembly, maintenance, and service work where threads are reworked or repaired.

What is the advantage of the ratchet function?
It enables work with short movements when there is not enough space for a full rotary movement.

Where can you find more information about threading tools?
VD 23 catalog as PDF

Do you need support with selection or application?
Use the contact form.

Additional information
Size No. 2
Length 100 mm
EAN 4022835100027
Item number 10002
Packing unit (pcs.) 10
Application 4.5-8.0 mm (M5-12)
Tool Holder with Ratchet for Right- and Left-Hand Operation No. 2 (10 Pieces) | VÖLKEL

Tool Holder with Ratchet for Right- and Left-Hand Operation No. 2 (10 Pieces)

This tool holder with ratchet is used as an operating and holding tool for taps when the available swing space is limited. It enables controlled guidance of the tool even in installation situations where continuous rotary movement is not possible.

The ratchet function allows short, repeatable movements, making it possible to position and guide taps precisely. Switching between right- and left-hand operation supports the workflow when cutting and retracting the tool, especially during maintenance and assembly work.

Application

  • Drive taps in areas with limited swing space
  • Use the tool holder for secure fixing and guidance of the tap
  • Control direction changes precisely via the ratchet function
  • Machine internal threads in assembly, maintenance, and service applications
  • Process: manual or assisted drive depending on your tool holder and machine configuration
  • Use: thread cutting, reworking threads, and cleaning threads depending on the condition of the thread

Note Ensure clean alignment with the thread axis and secure fixing of the tool to guarantee even guidance.

Advantages

  • Ratchet mechanism allows work with short movements in limited space
  • Switchable for right- and left-hand operation for structured machining
  • Makes positioning and guiding taps easier
  • Suitable for maintenance, assembly, and rework on existing threads
  • Supports controlled power transmission during manual use
Disadvantages
  • Only suitable to a limited extent for applications with high torque requirements
  • Requires steady handling for even machining results

Step by Step

  1. Clean the tool holder and tap thoroughly and check the holder for a clean condition. This ensures that the tap can be clamped correctly.
  2. Insert the tap into the holder and fix it evenly until it sits securely and without play. Stable fixing is crucial for guidance.
  3. Set the desired rotation direction via the ratchet and check the function before use. This helps you avoid incorrect movements during the process.
  4. Align the tool holder exactly with the thread axis and begin with short, controlled movements. Keep the alignment constant to ensure clean thread guidance.
  5. If necessary, switch the rotation direction, guide the tap back in a controlled manner, and then remove it. Clean the tool after use.

Scope of Delivery

  • 10 pieces Tool Holder with Ratchet for Right- and Left-Hand Operation No. 2

Technical Features

  • Design: Tool holder with ratchet
  • Application range: Holding and operating taps
  • Function: Switchable right- and left-hand operation
  • Version: No. 2
  • Use: Holding and operating tool in thread cutting

Frequently Asked Questions (FAQ)

When is this tool holder useful?
It is useful when you need to use taps in areas with limited movement space and short working movements are required.

What does the designation No. 2 mean?
The designation describes the version within the product range and serves for clear identification.

Can you use it for right- and left-hand operation?
Yes, the integrated ratchet function allows switching between both rotation directions.

What should you pay attention to during use?
Ensure exact alignment with the thread axis and stable fixing of the tap to achieve clean results.

What work is the holder suitable for?
It is especially suitable for assembly, maintenance, and service work where threads are reworked or repaired.

What is the advantage of the ratchet function?
It enables work with short movements when there is not enough space for a full rotary movement.

Where can you find more information about threading tools?
VD 23 catalog as PDF

Do you need support with selection or application?
Use the contact form.

Die visible through a larger die.
Application consulting
Always the perfect product for your application situation
Request consulting