Tool Holder with Ratchet for Right- and Left-Hand Operation No. 20 (10 Pieces)

• Drive taps safely in areas with limited swing space
• Use the tool holder for stable fixing and guidance of the tap
• Carry out direction changes between right- and left-hand operation in a controlled manner
• Machine internal threads in assembly, maintenance, and repair applications
• Process: manual or assisted drive depending on your tool holder and machine configuration
• Use: thread cutting, reworking threads, and cleaning threads depending on the condition of the thread

Note Make sure that the tap is securely clamped and that the tool holder is guided in alignment with the thread axis.

• Ratchet mechanism enables work with short movements in limited space
• Switchable for right- and left-hand operation for flexible use
• Makes controlled positioning and guiding of the tap easier
• Suitable for maintenance, assembly, and rework on existing threads
• Supports even power transmission during manual use

• Only suitable to a limited extent for applications with very high torque requirements
• Requires precise and steady hand guidance for even results

1. Clean the tool holder and tap thoroughly and check that the holder is clean. This ensures secure fixing.
2. Insert the tap into the holder and fix it evenly until it sits firmly and without play. Stable clamping is crucial for guidance.
3. Set the desired rotation direction on the ratchet and check the function before use. This ensures a controlled workflow.
4. Align the tool holder exactly with the thread axis and begin with short, even movements. Keep the alignment constant to achieve clean results.
5. If necessary, switch the rotation direction, guide the tap back in a controlled manner, and then remove it. Clean the tool after use.

• 10 pieces Tool Holder with Ratchet for Right- and Left-Hand Operation No. 20

• Design: Tool holder with ratchet
• Application range: Holding and operating taps
• Function: Switchable right- and left-hand operation
• Version: No. 20

When is this tool holder useful?
It is useful when you need to use taps in areas with limited movement space and short working movements are required.

What does the designation No. 20 mean?
The designation serves for classification within the product range and supports selection of the appropriate version.

Can you use it for right- and left-hand operation?
Yes, the integrated ratchet function allows switching between both rotation directions during the work process.

What should you pay attention to during use?
Exact alignment with the thread axis and secure fixing of the tap are crucial for a clean result.

What work is the holder suitable for?
It is suitable for maintenance, repair, and assembly applications, especially in hard-to-reach thread positions.

What is the advantage of the ratchet function?
It enables work with short movements and makes machining easier in areas without a continuous rotary path.

Where can you find more information about threading tools?
VD 23 catalog as PDF