V-COIL Inserting Tool (Drive connector 1/4") M 14 x 1,5

• For thread inserts of size M 14 × 1.5
• Ideal for repair, mechanical engineering, automotive, metalworking
• Usable in aluminum, steel, cast materials, and technical plastics
• Compatible with V-COIL and equivalent systems

How to proceed during installation:

• Drill the core hole, cut the thread, and clean thoroughly.
• Screw the insert fully onto the inserting tool.
• Position straight at the thread entrance.
• Turn in the insert in a controlled manner and remove the tool.

1. Prepare the core hole: Drill, thread-cut, clean.
2. Attach the insert: Place the thread insert onto the tool.
3. Align: Position perpendicular to the thread.
4. Screw in: Turn evenly without tilting.
5. Check: Verify proper seating and remove the tool.

• Nominal Size: M 14 × 1.5
• Drive Connector: 1/4" square
• Material: High-strength precision steel
• Compatible with: V-COIL & equivalent systems
• Article Number: 08194
• EAN: 4022835081944

1. Does this tool also fit other thread pitches?

No, this tool is specifically designed for pitch 1.5. For 1.25 a separate tool is required.

2. Can I use this tool with a cordless drill?

Yes, at low speed. However, using a ratchet or torque wrench is more precise.

3. What if the insert slips during installation?

This usually means the insert is not properly seated on the driving tang. Simply reposition and attach it correctly.

4. Can I use damaged or bent inserts?

No. Damaged inserts can destroy the core thread or be installed crooked. Always replace them.

5. How do I avoid crooked installation?

Align the tool perfectly straight and ensure the cut thread is clean before installation.

6. Is the tool suitable for hard materials?

Yes, as long as the core hole is properly prepared.

7. How do I maintain the tool?

Clean after use, oil lightly, and store in a dry place.

8. What installation depth is possible?

The installation depth corresponds to the length of the chosen thread insert – standard and long versions are possible.

• 1× V-COIL Inserting Tool, 1/4", M 14 × 1.5 (Art. No. 08194)