Go to homepage
Go to homepage
Skip image gallery
VÖLKEL machine tap (thread roll former) with golden TiN coating for chipless, strong, and stable threads.
Thread Repair Workshop Kits

VC80 Thread Repair Workshop Kit M 5 - M 12

Item no. 04080

€175.00

in stock - more than 100 pieces available
Application
VC80 Thread Repair Workshop Kit M 5 – M 12 | VÖLKEL

VC80 Thread Repair Workshop Kit M 5 – M 12

The VC80 Thread Repair Workshop Kit M 5 – M 12 is a complete solution for repairing damaged or worn internal threads. It is ideal for maintenance, installation and small series production, and helps you create new, high-strength and long-lasting internal threads.

Application
  • Thread repair of damaged or worn-out internal threads
  • Thread reinforcement for materials with low shear strength
  • Recovery of rejected components
  • For new, highly stable and long-lasting internal threads
  • Perfect for maintenance, installation and small series production
  • Wire thread inserts DIN 8140, tolerance ISO 2 (6H), Type S – free running, stainless steel
  • Assortment with the most popular dimensions in an attractive and functional case

Advantages
  • Flexible use thanks to inserts and drills for sizes up to M12
  • High availability for standard and special dimensions
  • Designed for manual operation
  • Higher load capacity after repair due to improved thread properties
  • Corrosion and temperature resistance
  • Attractive and functional plastic case

Step-by-Step Instructions
  1. Prepare: Clean the damaged thread and remove chips, dirt and oil residues.
  2. Drill: Select the appropriate STI twist drill version and drill the core hole.
  3. Tap: Cut the STI internal thread using the matching STI short machine tap (Form D).
  4. Install insert: Select the required insert length (1.0 D / 1.5 D / 2.0 D) and install it with the matching hand inserting tool.
  5. Break tang: Remove the tang using the matching tang break tool.
  6. Check: Verify the repaired thread with a suitable screw or bolt.

Contents
  • 1x STI short machine tap HSS-G Form D M 5 (03008)
  • 1x STI short machine tap HSS-G Form D M 6 (03009)
  • 1x STI short machine tap HSS-G Form D M 8 (03011)
  • 1x STI short machine tap HSS-G Form D M 10 (03015)
  • 1x STI short machine tap HSS-G Form D M 12 (03020)
  • 1x STI twist drill HSS-G 5.2 mm (00052)
  • 1x STI twist drill HSS-G 6.3 mm (00063)
  • 1x STI twist drill HSS-G 8.3 mm (00083)
  • 1x STI twist drill HSS-G 10.4 mm (00104)
  • 1x STI twist drill HSS-G 12.4 mm (00124)
  • 1x Hand inserting tool (08008) and tang break tool No. 8 for M 5 (07008)
  • 1x Hand inserting tool (08009) and tang break tool No. 9 for M 6 (07009)
  • 1x Hand inserting tool (08011) and tang break tool No. 11 for M 8 (07011)
  • 1x Hand inserting tool (08013) and tang break tool No. 13 for M 10 (07013)
  • 1x Hand inserting tool (08015) and tang break tool No. 15 for M 12 (07015)
  • Wire thread inserts M 5 (10 pcs each): 1.0 D (07208), 1.5 D (07308), 2.0 D (07408)
  • Wire thread inserts M 6 (10 pcs each): 1.0 D (07209), 1.5 D (07309), 2.0 D (07409)
  • Wire thread inserts M 8 (10 pcs each): 1.0 D (07211), 1.5 D (07311), 2.0 D (07411)
  • Wire thread inserts M 10 (10 pcs each): 1.0 D (07215), 1.5 D (07315), 2.0 D (07415)
  • Wire thread inserts M 12 (5 pcs each): 1.0 D (07221), 1.5 D (07321), 2.0 D (07421)

Technical Features
  • Material: stainless steel wire thread inserts
  • Size range: M 5 – M 12
  • Packaging: plastic case
  • EAN: 4022835040804
  • Item number: 04080

Frequently Asked Questions (FAQ)

Why are three insert lengths included (1.0 D / 1.5 D / 2.0 D)?

They allow you to match the insert length to component thickness and load requirements for a reliable repair.

Are wire thread inserts suitable for aluminum?

Yes, wire thread inserts are commonly used in aluminum and similar materials to improve load capacity and durability.

Can I reuse the tools in the kit?

Yes. Drills, taps, hand inserting tools and tang break tools are reusable. Only the inserts are consumables.

Do I need additional tools for the repair process?

No. The VC80 kit contains all essential tools for the typical thread repair workflow.

What does “Type S – free running” mean?

It describes inserts designed for standard applications with a free running thread, according to DIN 8140.

Need help or want to request a quote?
Use the contact form.

Additional information
Material Wire Thread Inserts from stainless steel
Size Diameter M 5 - 12
Packing in plastic case
EAN 4022835040804
Item number 04080
VC80 Thread Repair Workshop Kit M 5 – M 12 | VÖLKEL

VC80 Thread Repair Workshop Kit M 5 – M 12

The VC80 Thread Repair Workshop Kit M 5 – M 12 is a complete solution for repairing damaged or worn internal threads. It is ideal for maintenance, installation and small series production, and helps you create new, high-strength and long-lasting internal threads.

Application
  • Thread repair of damaged or worn-out internal threads
  • Thread reinforcement for materials with low shear strength
  • Recovery of rejected components
  • For new, highly stable and long-lasting internal threads
  • Perfect for maintenance, installation and small series production
  • Wire thread inserts DIN 8140, tolerance ISO 2 (6H), Type S – free running, stainless steel
  • Assortment with the most popular dimensions in an attractive and functional case

Advantages
  • Flexible use thanks to inserts and drills for sizes up to M12
  • High availability for standard and special dimensions
  • Designed for manual operation
  • Higher load capacity after repair due to improved thread properties
  • Corrosion and temperature resistance
  • Attractive and functional plastic case

Step-by-Step Instructions
  1. Prepare: Clean the damaged thread and remove chips, dirt and oil residues.
  2. Drill: Select the appropriate STI twist drill version and drill the core hole.
  3. Tap: Cut the STI internal thread using the matching STI short machine tap (Form D).
  4. Install insert: Select the required insert length (1.0 D / 1.5 D / 2.0 D) and install it with the matching hand inserting tool.
  5. Break tang: Remove the tang using the matching tang break tool.
  6. Check: Verify the repaired thread with a suitable screw or bolt.

Contents
  • 1x STI short machine tap HSS-G Form D M 5 (03008)
  • 1x STI short machine tap HSS-G Form D M 6 (03009)
  • 1x STI short machine tap HSS-G Form D M 8 (03011)
  • 1x STI short machine tap HSS-G Form D M 10 (03015)
  • 1x STI short machine tap HSS-G Form D M 12 (03020)
  • 1x STI twist drill HSS-G 5.2 mm (00052)
  • 1x STI twist drill HSS-G 6.3 mm (00063)
  • 1x STI twist drill HSS-G 8.3 mm (00083)
  • 1x STI twist drill HSS-G 10.4 mm (00104)
  • 1x STI twist drill HSS-G 12.4 mm (00124)
  • 1x Hand inserting tool (08008) and tang break tool No. 8 for M 5 (07008)
  • 1x Hand inserting tool (08009) and tang break tool No. 9 for M 6 (07009)
  • 1x Hand inserting tool (08011) and tang break tool No. 11 for M 8 (07011)
  • 1x Hand inserting tool (08013) and tang break tool No. 13 for M 10 (07013)
  • 1x Hand inserting tool (08015) and tang break tool No. 15 for M 12 (07015)
  • Wire thread inserts M 5 (10 pcs each): 1.0 D (07208), 1.5 D (07308), 2.0 D (07408)
  • Wire thread inserts M 6 (10 pcs each): 1.0 D (07209), 1.5 D (07309), 2.0 D (07409)
  • Wire thread inserts M 8 (10 pcs each): 1.0 D (07211), 1.5 D (07311), 2.0 D (07411)
  • Wire thread inserts M 10 (10 pcs each): 1.0 D (07215), 1.5 D (07315), 2.0 D (07415)
  • Wire thread inserts M 12 (5 pcs each): 1.0 D (07221), 1.5 D (07321), 2.0 D (07421)

Technical Features
  • Material: stainless steel wire thread inserts
  • Size range: M 5 – M 12
  • Packaging: plastic case
  • EAN: 4022835040804
  • Item number: 04080

Frequently Asked Questions (FAQ)

Why are three insert lengths included (1.0 D / 1.5 D / 2.0 D)?

They allow you to match the insert length to component thickness and load requirements for a reliable repair.

Are wire thread inserts suitable for aluminum?

Yes, wire thread inserts are commonly used in aluminum and similar materials to improve load capacity and durability.

Can I reuse the tools in the kit?

Yes. Drills, taps, hand inserting tools and tang break tools are reusable. Only the inserts are consumables.

Do I need additional tools for the repair process?

No. The VC80 kit contains all essential tools for the typical thread repair workflow.

What does “Type S – free running” mean?

It describes inserts designed for standard applications with a free running thread, according to DIN 8140.

Need help or want to request a quote?
Use the contact form.

Recommended products

Skip product gallery

Related products

All products
Die visible through a larger die.
Application consulting
Always the perfect product for your application situation
Request consulting
This website uses cookies to ensure the best experience possible. More information...