Dart-Tap BA 2 - ISO 529 - Form C – HSSE-PM
€25.00
VÖLKEL Dart Tap BA 2 - ISO 529 - Form C - HSSE-PM
This VÖLKEL Dart Tap BA 2 in the HSSE-PM version is your specialist tool when it comes to the high-precision thread on darts. It was developed for general use and is, thanks to its powder metallurgical steel, especially robust and durable. It is ideal for repairing damaged threads in your dart barrel or for cutting new threads during manufacturing. It guarantees a durable and exact connection, even with frequent use and harder materials.
Would you like to learn more? Click here to read our blog post about dart threads.
Special Feature: The HSSE-PM Version
This tap is not only specialized for the unique BA2 thread, which is the standard for the connection between the barrel and the shaft on darts, but it also stands out due to its material. The HSSE-PM version, made from powder metallurgical steel, offers significantly higher toughness and wear resistance than the standard HSSE version. This makes it the ideal choice for ambitious players, workshops, and anyone looking for an extremely durable and reliable solution.
In our assortment, you will also find other suitable tools for dart thread processing:
Area of Application & Features
The tap is suitable for general use under the following conditions:
- For easily machinable materials up to 1,000 N/mm².
- Especially robust version made of powder metallurgical HSSE-PM steel.
- Optimal for unalloyed and low-alloy steels.
- Suitable for hand and machine use.
- Can be used for through holes and blind holes.
Step-by-Step Instructions for Thread Repair
Here's how you repair a thread in a dart barrel:
- Prepare: Clamp the dart barrel firmly and securely in a vice or a holder.
- Position: Position the tap straight at the thread opening. Use a tap wrench for manual use.
- Cut the thread: Turn the tap carefully and evenly into the internal thread. Pay attention to chip breaking by turning a quarter turn back now and then.
- Clean: After cutting, remove all chips from the thread.
- Test: Check the repaired thread by carefully screwing in a new shaft.
Technical Data
- Thread Type: BA-thread according to BS 93
- Standard: ISO 529
- Material: HSSE-PM
- Nominal Dimension: BA 2
- Overall Length (L1): 58 mm
- Thread Length (L2): 16 mm
- Shank Diameter (D2): 5 mm
- Square Drive: 4 mm
- EAN: 4022835894094
- Article Number: 89409
Frequently Asked Questions (FAQ)
- What is the difference between a BA2 thread and a metric thread?
- The BA2 thread is a fine thread characterized by a special flank angle of 47.5°. It is the established standard for the precise and robust connection between the barrel and shaft on darts.
- Can I use this tap for both hand and machine use?
- Yes, the tap is versatile. You can use it manually with a tap wrench as well as in a machine.
- Why is a specialized dart tap important?
- Darts are precision tools. A regular tap cannot guarantee the fine tolerances. This special tap ensures that the connection between the shaft and barrel fits perfectly and holds up even under heavy use.
- Which materials is this HSSE-PM tap suitable for?
- This tap is optimized for easily machinable materials with a tensile strength up to 1,000 N/mm², especially unalloyed and low-alloy steels.
- How do I repair a worn internal thread in the dart barrel?
- You clamp the barrel and carefully guide the tap into the hole. By cutting a new thread with this special tap, the barrel regains its original functionality.
| Type of thread | BA-Thread BS 93 |
|---|---|
| Standard | ISO 529 |
| Material | HSSE-PM |
| Size | BA 2 |
| Overall length (L1) | 58 mm |
| Thread length (L2) | 16 mm |
| Shank diameter (D2) | 5 mm |
| Drive connector | 4 mm |
| EAN | 4022835894094 |
| Item number | 89409 |
