Die Stock for square dies steel No. 1

Item no. 29398

€90.00

in stock - more than 10 pieces available

VÖLKEL delivers exclusively to specialized dealers. Online you can buy VÖLKEL products here.

The prices are in Euro plus VAT and shipping, insurance and packaging costs.

Application

You use this steel die stock to hold square dies during external-thread cutting or reworking. The decisive selection criterion is No. 1, because the holder must fit the square die and provide controlled manual guidance.

The die stock does not cut a thread by itself. It clamps the die for work on bolts, studs, and shafts, so die size, holder fit, starting alignment, and workpiece preparation decide the result.

Application

for holding square dies during external thread cutting or reworking
for manual guidance on bolts, studs, and shafts
for use when the square die size matches the holder size
for clamping and handling only, not for cutting by itself

Note Use the die stock only with matching square dies and keep the die square to the workpiece axis.

Benefits

Steel holder construction provides a defined clamping tool for square dies.
Holder number in the title supports selection by holder size.
The tool keeps square-die handling separate from the cutting die itself.
Manual guidance helps start and maintain alignment when used correctly.

Drawbacks

The die stock requires a matching square die, so do not use it with round dies or unsupported die sizes.

Step by step

Select a square die that matches the required external thread.
Check that the square die fits the die stock size.
Insert the die into the holder.
Clamp the die securely before use.
Place the holder square to the workpiece axis.
Turn the holder with controlled pressure.
Remove and clean the die after the operation.

Scope of supply

1 piece Die Stock for square dies steel No. 1

Technical features

Product type: die stock for square dies
Thread designation: Die Stock for square dies steel No. 1
Material: Stahl-Ausführung
Holder target: square dies

Frequently asked questions (FAQ)

What does the die stock hold?

It holds square dies for external-thread cutting or reworking.

Can it cut a thread by itself?

No, the die stock is a holder and the square die performs the cutting operation.

How do you select the correct holder?

Select the die stock by holder number and by the square die size required for the job.

What thread operation is it used with?

It supports external thread work on bolts, studs, and shafts when the square die matches the thread.

What prevents poor starting alignment?

Secure clamping, a clean start chamfer, and square positioning reduce the risk of damaging the first thread turns.

Where can you find holder information?

You can find holder and threading tool information here: VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

In this category: Threading tools

Additional information

Material	steel
Size	No. 1
Length	465 mm
EAN	4022835293989
Item number	29398
Application	38,8 mm

The die stock does not cut a thread by itself. It clamps the die for work on bolts, studs, and shafts, so die size, holder fit, starting alignment, and workpiece preparation decide the result.

Application

for holding square dies during external thread cutting or reworking
for manual guidance on bolts, studs, and shafts
for use when the square die size matches the holder size
for clamping and handling only, not for cutting by itself

Note Use the die stock only with matching square dies and keep the die square to the workpiece axis.

Benefits

Steel holder construction provides a defined clamping tool for square dies.
Holder number in the title supports selection by holder size.
The tool keeps square-die handling separate from the cutting die itself.
Manual guidance helps start and maintain alignment when used correctly.

Drawbacks

The die stock requires a matching square die, so do not use it with round dies or unsupported die sizes.

Step by step

Select a square die that matches the required external thread.
Check that the square die fits the die stock size.
Insert the die into the holder.
Clamp the die securely before use.
Place the holder square to the workpiece axis.
Turn the holder with controlled pressure.
Remove and clean the die after the operation.

Scope of supply

1 piece Die Stock for square dies steel No. 1

Technical features

Product type: die stock for square dies
Thread designation: Die Stock for square dies steel No. 1
Material: Stahl-Ausführung
Holder target: square dies

Frequently asked questions (FAQ)

What does the die stock hold?

It holds square dies for external-thread cutting or reworking.

Can it cut a thread by itself?

No, the die stock is a holder and the square die performs the cutting operation.

How do you select the correct holder?

Select the die stock by holder number and by the square die size required for the job.

What thread operation is it used with?

It supports external thread work on bolts, studs, and shafts when the square die matches the thread.

What prevents poor starting alignment?

Secure clamping, a clean start chamfer, and square positioning reduce the risk of damaging the first thread turns.

Where can you find holder information?

You can find holder and threading tool information here: VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

In this category: Threading tools

Application consulting

Always the perfect product for your application situation

Request consulting