Skip to main content Skip to search Skip to main navigation
Application

VÖLKEL Die Stock Zinc Die Cast 13/16" (20.6 × 6.35 mm)

The VÖLKEL Die Stock made of zinc die cast is a practical solution for external thread cutting and thread repair. With a nominal size of 13/16" (fits 20.6 × 6.35 mm round dies) and a length of 200 mm, it provides good leverage and easy handling. Often referred to as a die holder or thread cutter holder, this tool is ideal for workshops, maintenance tasks, and hobby use.

Applications & Benefits

  • Reliable external thread cutting and repair with secure die clamping
  • Lightweight and corrosion-resistant thanks to zinc die cast design
  • 200 mm length ensures control and leverage for precise work
  • Economic choice for occasional use, repairs and smaller series
  • Compatible with 20.6 × 6.35 mm round dies

Step-by-Step Instructions

  1. Chamfer the workpiece edge and clamp it firmly.
  2. Insert the die into the die stock and tighten the screws.
  3. Apply cutting oil to improve tool life and thread quality.
  4. Start cutting at a right angle, turning steadily into the material.
  5. Check alignment and clean chips until full thread length is cut.
  6. Remove the die, deburr the edge and verify with a nut.

Technical Details

MaterialZinc die cast
Nominal size13/16"
Length200 mm
EAN4022835155201
Article number15520
Application rangeRound dies 20.6 × 6.35 mm

FAQ

Which dies fit this holder?
Round dies 13/16" (20.6 × 6.35 mm).

Is it suitable for thread repair?
Yes, it is commonly used for external thread repair and reworking damaged threads.

How is the die fixed?
Simply insert and secure with the side screws.

What is the total length?
200 mm for good leverage during thread cutting.

Alternative names?
Also referred to as die holder or thread cutter holder.

Do you have questions about use or availability? Contact us via our contact form.

Additional information
Material Zinc die cast
Size 13/16
Length 200 mm
EAN 4022835155201
Item number 15520
Application 20.6 x 6.35 mm

VÖLKEL Die Stock Zinc Die Cast 13/16" (20.6 × 6.35 mm)

The VÖLKEL Die Stock made of zinc die cast is a practical solution for external thread cutting and thread repair. With a nominal size of 13/16" (fits 20.6 × 6.35 mm round dies) and a length of 200 mm, it provides good leverage and easy handling. Often referred to as a die holder or thread cutter holder, this tool is ideal for workshops, maintenance tasks, and hobby use.

Applications & Benefits

  • Reliable external thread cutting and repair with secure die clamping
  • Lightweight and corrosion-resistant thanks to zinc die cast design
  • 200 mm length ensures control and leverage for precise work
  • Economic choice for occasional use, repairs and smaller series
  • Compatible with 20.6 × 6.35 mm round dies

Step-by-Step Instructions

  1. Chamfer the workpiece edge and clamp it firmly.
  2. Insert the die into the die stock and tighten the screws.
  3. Apply cutting oil to improve tool life and thread quality.
  4. Start cutting at a right angle, turning steadily into the material.
  5. Check alignment and clean chips until full thread length is cut.
  6. Remove the die, deburr the edge and verify with a nut.

Technical Details

MaterialZinc die cast
Nominal size13/16"
Length200 mm
EAN4022835155201
Article number15520
Application rangeRound dies 20.6 × 6.35 mm

FAQ

Which dies fit this holder?
Round dies 13/16" (20.6 × 6.35 mm).

Is it suitable for thread repair?
Yes, it is commonly used for external thread repair and reworking damaged threads.

How is the die fixed?
Simply insert and secure with the side screws.

What is the total length?
200 mm for good leverage during thread cutting.

Alternative names?
Also referred to as die holder or thread cutter holder.

Do you have questions about use or availability? Contact us via our contact form.

Die visible through a larger die.
Application consulting
Always the perfect product for your application situation
Request consulting