Hand Tap Rougher DIN 2181 HSS-G - M 3 x 0.35 | VÖLKEL
Hand Tap Rougher DIN 2181 HSS-G - M 3 x 0.35
Use this threading tool when you want a reliable thread form on components in mechanical engineering and metal fabrication.
In routine shop use, careful alignment and a suitable lubricant reduce the risk of thread damage and tool overload.
- Cut internal threads in workshop work where manual control is preferred over machine feed.
- Use for repair, rework, and short series operations where setup time needs to stay low.
- Apply to through holes and blind holes when the correct tap type is selected for the hole condition.
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: thread cutting, re tapping, and thread cleaning depending on condition
Note Select the variant stated in the product name and keep preparation and inspection steps aligned with your process documentation.
- Supports reliable thread engagement when the tool is guided straight and lubricated appropriately.
- Helps you achieve consistent assembly feel across repeated operations in shop workflows.
- Supports rework tasks where restoring thread quality prevents scrap.
- Works well in maintenance routines when you need predictable handling and tool response.
- Enables clear process planning when the tool type matches hole condition and material.
Drawbacks
- Tool performance depends on workpiece material and condition, so you must select a suitable execution for the application.
- Not designed for extreme high volume production without process control and dedicated machine tooling.
- Prepare the workpiece thread area according to your process plan and remove burrs.
- Align the tool square to the hole axis or shaft axis before you start cutting.
- Apply a suitable cutting lubricant to support smooth cutting action.
- Drive the tool forward with steady rotation while you keep alignment stable.
- Reverse the tool and remove chips from the flutes and the work area.
- Clean the thread, then check assembly feel with a matching fastener or gauge.
- Clean the tool and store it protected from impact and corrosion.
- 1 piece tap, DIN execution as stated in the product name
- Tool type: Hand tap
- Standard reference: DIN 2181
- Tool material: HSS-G
- Thread designation: M 3 x 0.35
- Thread system: Metric thread
- How do you choose between hand tapping and machine tapping?
- Choose hand tapping when you need close control and low setup effort, and choose machine tapping when you need repeatability and stable feed control.
- Can you cut the thread size M 3 x 0.35 with this tool?
- Use the thread designation in the product name to match the required thread, then follow your shop procedure for hole preparation, lubrication, and inspection.
- What causes a rough thread surface after cutting?
- Common causes include misalignment, unsuitable lubricant, tool wear, or chips trapped in the flutes, so focus on straight guidance and clean working conditions.
- How do you extend tool life in routine use?
- Use a suitable lubricant, avoid side load, keep cutting edges protected from impact, and replace the tool when cutting forces or thread quality change.
- How do you confirm thread quality without measuring equipment?
- You can check assembly feel with a matching fastener and look for smooth engagement, then use a gauge if your process requires documented conformity.
- Where do you find technical background for this execution?
- Use the technical information for selection and process setup guidance. Technical information hand taps as PDF
- How do you keep the process stable in repeated operations?
- Use consistent preparation, stable guidance, and a clean working area so results remain comparable across batches.
- Where do you find the complete catalog context for this product class?
- For additional product and system information, use the catalog. VD 23 catalog as PDF
Do you need help selecting or using the product?
Use the contact form.
