HexTap Type S Threading Bit, 1/4" hexagon drive Form D HSS-G - M 5 x 0.5
Item no.
67705
€5.40
in stock - more than 10 pieces available
Application
VÖLKEL-Threading-Bits have been designed for thread cutting using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation. But they are also suitable for thread cutting by hand or in a stationary drilling machine. Your battery-powered screwdriver drill should have a minimupower of 7.5 Volts. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil.
Additional information
| Type of thread | metric-fine ISO-thread |
|---|---|
| Standard | Works Standard |
| Form | Form D |
| Material | HSS-G |
| Tolerance | ISO2 (6H) |
| Size | M 5 x 0.5 |
| Overall length (L1) | 36 mm |
| Thread length (L2) | 15 mm |
| Core hole diameter (D1) | 4.5 mm |
| Width across flat (SW1) | Zoll |
| EAN | 4022835677055 |
| Item number | 67705 |
| Type of flute | straight fluted |
| Application | for through and blind holes |
| Thread standard | DIN 13 |
