This refill pack supplies V-COIL free running type S inserts for service cases where a damaged internal BSF 9/16 x 16 thread must be rebuilt with a wire insert. Match thread, insert length 3.0 D, and installation tool system before use.
BSF identifies a British Standard Fine thread used where a finer Whitworth thread series is specified. Free running inserts are selected when normal screw running behavior is required after installation. Keep the setup controlled by checking alignment, chip removal, seating position, and final thread engagement. This makes the refill pack specific to repeat repair work where insert stock must remain clearly matched to the thread size.
- installing wire thread inserts in a prepared STI thread for BSF 9/16 x 16
- selection by thread designation, insert length 3.0 D, and free running type S execution
- repairing internal threads in components that need the original screw connection concept retained
- workshop stock management for repeated V-COIL repair operations
Note Use only with the correct STI tap, installation tool, and thread preparation process for BSF 9/16 x 16.
- free running insert execution is suited to screw connections without an additional locking insert function
- insert length 3.0 D is visible in the product data for quick comparison with the repair specification
- British Standard Fine thread identification helps separate metric, Unified, or Whitworth repair stock
- compact refill stock supports maintenance planning for repeated insert replacement
Drawbacks
- This refill pack does not include preparation or installation tools; use a suitable V-COIL repair kit or tool set when the required tools are not already available.
- Compare BSF 9/16 x 16 and 3.0 D with the repair specification before opening the refill pack.
- Remove damaged thread material using the preparation tools specified for the repair system.
- Create the STI receiving thread with the matching repair tap.
- Clean the bore and thread flanks before the insert is installed.
- Install the wire insert to the specified seating position using the correct tool.
- Remove installation remnants where the process requires that action.
- Verify that the mating screw starts smoothly and reaches the required engagement.
- 5 pieces V-COIL free running type S inserts BSF 9/16 x 16 - 3.0 D
- System: V-COIL wire thread insert
- Insert execution: free running type S
- Thread system: British Standard Fine thread
- Thread designation: BSF 9/16 x 16
- Insert length: 3.0 D
- Pack quantity: 5 pieces
- When do you choose a refill pack instead of a complete repair kit?
- Choose a refill pack when the required drills, STI taps, inserting tools, and tang tools are already available for the repair system.
- Which thread does this insert match?
- This insert matches BSF 9/16 x 16. BSF identifies a British Standard Fine thread used where a finer Whitworth thread series is specified.
- What does free running type S mean in assembly?
- Free running type S supports normal screw movement after correct installation and does not add a locking insert function.
- Why is insert length important?
- Insert length 3.0 D affects the available thread engagement in the repaired component and must match the repair requirement.
- Where can you find V-COIL thread repair technical information?
- Use the Technical information V-COIL thread repair as PDF.
- What should be checked after installation?
- Check that the insert sits below the entry surface where required, that the screw starts smoothly, and that no chips remain in the thread.
- How do you avoid mixing inch repair sizes?
- Compare thread family, nominal size, threads per inch, and insert length because similar inch sizes are not interchangeable.
- Where can you find the VÖLKEL thread repair catalog?
- Use the VC 23 catalog as PDF.
Do you need help selecting or using the product?
Use the contact form.
In this category: Thread repair
Related products: Wire Thread Inserts
