V-COIL Wire thread insert Free running type S M 42 x 4.5 - 1.5 D (5 pcs.)

Item no. 07372

€19.90

in stock - less than 1.000 pieces available

VÖLKEL delivers exclusively to specialized dealers. Online you can buy VÖLKEL products here.

The prices are in Euro plus VAT and shipping, insurance and packaging costs.

Application

You use the type S free running insert to create a repaired internal thread for M 42 X 4.5. It is relevant in maintenance, mechanical engineering, and service work where the original screw size is retained.

M identifies ISO metric thread notation, where nominal diameter and pitch define the matching thread. The insert requires the matching V-COIL preparation sequence and should be stored separately from other sizes. The product title states 5 pieces.

Application

for repairing internal threads with the original designation M 42 X 4.5
for installation into a prepared STI receiving thread
for maintenance, service, tool room, and mechanical engineering repair processes
for free running screw movement after correct installation

Note Use the insert only with the matching V-COIL repair workflow and do not install it into an unprepared standard thread.

Benefits

Restores the usable internal screw thread after the V-COIL receiving thread has been prepared.
Thread designation M 42 X 4.5 keeps insert selection tied to the original screw size.
Free running type S supports standard screw movement after repair without a locking insert function.
Pack quantity in the product title supports repeated repair work in the same thread size.

Drawbacks

The insert cannot be used alone, so use the matching drilling, STI tapping, insertion, and inspection steps from the V-COIL repair system.

Step by step

Identify the damaged original internal thread as M 42 X 4.5.
Prepare the receiving thread with the matching V-COIL drilling and STI tapping sequence.
Clean the prepared receiving thread before installation.
Place the insert on the suitable inserting tool.
Install the insert into the receiving thread with controlled alignment.
Position the insert according to the repair requirement.
Remove the driving tang where the insert type and repair process require it.
Inspect the repaired internal thread before screw assembly.

Scope of supply

5 pieces V-COIL Wire thread insert Free running type S M 42 x 4.5 - 1.5 D (5 pcs.)

Technical features

Product type: V-COIL wire thread insert
Thread system: M
Thread designation: M 42 X 4.5
Material: aus rostfreiem Stahl
Package quantity: 5 pieces
Insert length: 1.5 D

Frequently asked questions (FAQ)

What does this insert repair?

It repairs an internal thread for M 42 X 4.5 after the matching STI receiving thread has been prepared.

Is it a cutting tool?

No, the insert does not drill or tap and must be installed after the V-COIL preparation steps are complete.

How do you select the correct insert?

Select the insert by original thread size, pitch, insert type, insert length, and the package data in the product title.

What does free running type S mean?

Free running type S is selected for standard screw movement without an additional locking insert function.

Where can you find V-COIL repair information?

Additional V-COIL repair guidance is available here: Technical information V-COIL thread repair as PDF

What should you check before installation?

Check that drilling, STI tapping, cleaning, insertion tool, and tang removal logic match the V-COIL repair workflow.

Where can you find the V-COIL catalog?

You can find the thread repair catalog here: VC 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

In this category: Thread repair

Additional information

Type of thread	metric ISO-thread
Standard	DIN 8140
Material	from stainless steel
Tolerance	ISO2 (6H)
Size	M 42 x 4.5
Length	1.5 x D
EAN	4022835073727
Item number	07372
Thread standard	DIN 13
Packing unit (pcs.)	5

Application

for repairing internal threads with the original designation M 42 X 4.5
for installation into a prepared STI receiving thread
for maintenance, service, tool room, and mechanical engineering repair processes
for free running screw movement after correct installation

Note Use the insert only with the matching V-COIL repair workflow and do not install it into an unprepared standard thread.

Benefits

Restores the usable internal screw thread after the V-COIL receiving thread has been prepared.
Thread designation M 42 X 4.5 keeps insert selection tied to the original screw size.
Free running type S supports standard screw movement after repair without a locking insert function.
Pack quantity in the product title supports repeated repair work in the same thread size.

Drawbacks

The insert cannot be used alone, so use the matching drilling, STI tapping, insertion, and inspection steps from the V-COIL repair system.

Step by step

Identify the damaged original internal thread as M 42 X 4.5.
Prepare the receiving thread with the matching V-COIL drilling and STI tapping sequence.
Clean the prepared receiving thread before installation.
Place the insert on the suitable inserting tool.
Install the insert into the receiving thread with controlled alignment.
Position the insert according to the repair requirement.
Remove the driving tang where the insert type and repair process require it.
Inspect the repaired internal thread before screw assembly.

Scope of supply

5 pieces V-COIL Wire thread insert Free running type S M 42 x 4.5 - 1.5 D (5 pcs.)

Technical features

Product type: V-COIL wire thread insert
Thread system: M
Thread designation: M 42 X 4.5
Material: aus rostfreiem Stahl
Package quantity: 5 pieces
Insert length: 1.5 D

Frequently asked questions (FAQ)

What does this insert repair?

It repairs an internal thread for M 42 X 4.5 after the matching STI receiving thread has been prepared.

Is it a cutting tool?

No, the insert does not drill or tap and must be installed after the V-COIL preparation steps are complete.

How do you select the correct insert?

Select the insert by original thread size, pitch, insert type, insert length, and the package data in the product title.

What does free running type S mean?

Free running type S is selected for standard screw movement without an additional locking insert function.

Where can you find V-COIL repair information?

Additional V-COIL repair guidance is available here: Technical information V-COIL thread repair as PDF

What should you check before installation?

Check that drilling, STI tapping, cleaning, insertion tool, and tang removal logic match the V-COIL repair workflow.

Where can you find the V-COIL catalog?

You can find the thread repair catalog here: VC 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

In this category: Thread repair

Application consulting

Always the perfect product for your application situation

Request consulting