P.K.28 HSS-E Machine taps (set of 7 pcs.) DIN 371/376 M 3 – M 12

• for machine internal thread cutting in the range M 3 - 12
• for through holes; Form B pushes the chips forward out of the hole in the cutting direction
• for tool assignment with the standard or dimension reference DIN 371/376
• Process: machine drive with a tapping chuck or collet holder; manual use only with secure guidance
• Use: thread cutting, re-tapping and thread cleaning depending on the condition of the thread

Note Before use, check thread system, size, material, hole type and core hole diameter so that tool and component match.

• 7 machine taps are available as a matching size series M 3 - 12
• HSS-E is a cobalt-alloyed high-speed steel with higher hot hardness than plain HSS
• Form B pushes the chips forward and suits through holes
• the standard or dimension reference DIN 371/376 simplifies assignment and reordering of individual sizes
• the plastic case protects the tools and makes completeness checks easier

• Form B is not intended for blind holes; machine taps of Form C or C/35° RSP are the right choice there.

1. Select the tap by thread size and pitch and check standard, form and material suitability.
2. Drill the core hole to the table diameter square to the surface and lightly countersink it.
3. Clamp the tap without play in a tapping chuck or collet holder.
4. Use a cutting fluid matched to the material.
5. Enter the hole centrally at the cutting speed recommended for the material.
6. Keep feed and speed synchronised or use a chuck with length compensation.
7. Retract the tool in reverse and clean thread and tool of chips.
8. Check the thread with a suitable thread gauge and return the tap to the case.

Taps, dies and cutting tools

• 1 piece Machine Tap DIN 371 Form B HSSE - M 3 x 0.5 (37526)
• 1 piece Machine Tap DIN 371 Form B HSSE - M 4 x 0.7 (37530)
• 1 piece Machine Tap DIN 371 Form B HSSE - M 5 x 0.8 (37534)
• 1 piece Machine Tap DIN 371 Form B HSSE - M 6 x 1.0 (37538)
• 1 piece Machine Tap DIN 371 Form B HSSE - M 8 x 1.25 (37542)
• 1 piece Machine Tap DIN 371 Form B HSSE - M 10 x 1.5 (37546)
• 1 piece Machine Tap DIN 376 Form B HSSE - M 12 x 1.75 (38550)

Storage and identification

• 1 piece plastic case

• Product class: Threading tools
• Product type: machine tap set
• Standard/dimensions: DIN 371/376
• Chamfer/form: Form B
• Tool material: HSS-E
• Thread type: metric ISO thread (M)
• Size range: M 3 - 12
• Tolerance: ISO 2 / 6H
• Hole type: through hole
• Number of taps: 7
• Storage: plastic case

Why does the set contain DIN 371/376?

DIN 371 applies to machine taps with a reinforced shank, DIN 376 to the larger sizes with an overflow shank. In this set the sizes M 3 – M 10 are assigned to DIN 371 and M 12 to DIN 376.

What does Form B mean?

Form B has a spiral point chamfer of 4 to 5 threads; it pushes the chips forward in the cutting direction and is intended for all through holes.

Which cutting fluid is suitable?

For steels a drilling oil emulsion or cutting oil with lubricity-increasing additives, for stainless and acid-resistant steels a highly activated thread cutting oil, for aluminium a thread cutting oil for non-ferrous metals or an emulsion. The values per material are given in the technical information.

How do you check the finished thread?

Clean the thread and check it with a thread gauge of tolerance ISO 2 / 6H or with the mating part. A documented check is advisable for safety-relevant parts.

Can you reorder individual sizes?

Yes, every tap included is available individually. The article numbers are listed in the scope of supply and lead directly to the single tool.

Where can you find the machine tap range in the catalogue?

The complete range is in the catalogue: VD 23 catalog as PDF

Is there technical information on machine taps?

Chamfer forms, hole types and material assignment are summarised here: Technical information machine taps as PDF