P.V.1 Hand taps and round dies (set of 43 pcs.) incl. drills M 3 – M 12

• for general-purpose use
• easily machinable materials up to 900 N/mm²
• unalloyed and low-alloy steels
• for through holes and blind holes
• for manual operation
• HSS-G hand taps according to DIN 352
• HSS round dies according to DIN 223 (DIN EN 22568)
• most common dimensions combined in one case

Advantages:

• complete set for internal and external threads
• matching core drills included for each thread size
• precise and dimensionally accurate threads
• ideal for maintenance, repair, assembly and workshop use
• durable HSS and HSS-G quality for long service life
• organized and safe storage in a robust case
• all threading tools and accessories available individually

1. Select thread size and tool:
   Determine the required thread size and select the matching hand tap or round die from the set. Ensure that the tool corresponds to the material being machined.
2. Prepare the core hole:
   Drill the core hole using the appropriate drill included in the set and clean the bore thoroughly. Proper preparation is essential for clean thread formation.
3. Align the tool correctly:
   Position the hand tap or round die straight and apply steady guidance at the start. Correct alignment ensures accurate and consistent thread geometry.
4. Cut the thread:
   Cut the thread with smooth, controlled rotation and even pressure. Avoid excessive force to maintain tool life and thread quality.
5. Finish and inspect:
   Remove the tool completely, clean the thread and check the fit with a suitable screw or nut. The thread should run smoothly without resistance.

• Thread range: M 3 – M 12
• Hand taps: HSS-G, DIN 352
• Round dies: HSS, DIN 223 (DIN EN 22568)
• Core drills: HSS twist drills
• Application: manual
• Article number: 49101
• EAN: 4022835491019

• 1× HSS-G hand tap set, 3 pcs, M 3 (27326)
• 1× HSS-G hand tap set, 3 pcs, M 4 (27330)
• 1× HSS-G hand tap set, 3 pcs, M 5 (27334)
• 1× HSS-G hand tap set, 3 pcs, M 6 (27338)
• 1× HSS-G hand tap set, 3 pcs, M 8 (27342)
• 1× HSS-G hand tap set, 3 pcs, M 10 (27346)
• 1× HSS-G hand tap set, 3 pcs, M 12 (27350)
• 1× HSS round die M 3 (27426)
• 1× HSS round die M 4 (27430)
• 1× HSS round die M 5 (27434)
• 1× HSS round die M 6 (27438)
• 1× HSS round die M 8 (27442)
• 1× HSS round die M 10 (27446)
• 1× HSS round die M 12 (27450)
• Core drills matched to M 3 – M 12
• Adjustable tap wrenches and die holders
• Ratchet tool holder, size 1

All threading tools and accessories are also available individually.

What is this set mainly used for?

This set is designed for manual cutting of new threads as well as rethreading and repairing damaged internal and external threads. It is suitable for professional workshop and maintenance applications.

Which materials can be machined?

The tools are suitable for easily machinable materials up to 900 N/mm². This includes unalloyed and low-alloy steels commonly used in mechanical applications.

Are matching core drills included?

Yes, matching HSS core drills for each thread size are included in the set. This allows immediate use without the need for additional tools.

Is the set suitable for blind holes?

Yes, the hand taps included can be used for both through holes and blind holes. Controlled and careful operation is recommended.

Can individual tools be reordered?

Yes, all hand taps, round dies and accessories included in the set are available individually. This ensures long-term usability of the set.