Skip to main content Skip to search Skip to main navigation
Application
  • Thread: BA 0 × 25.4 – British Association thread to BS 93
  • Design: Round die to BS 1127, Form A, split
  • Tool material: HSS – high-speed steel for readily machinable, non-abrasive materials up to 800 N/mm²
  • Thread direction: Right-hand thread
  • Recommended bolt diameter: 5.90 mm

The VÖLKEL round die BS 1127 HSS – BA 0 × 25.4 can be used to cut BA external threads accurately by hand to BS 93. The split Form A die is guided in a suitable die holder.

The HSS tool material is designed for general use in readily machinable, non-abrasive materials up to 800 N/mm². The split Form A design allows slight adjustment of the cutting diameter in a suitable holder.

The tool is suitable for producing and reworking BA 0 external threads on bolts, screws and cylindrical workpieces, particularly in precision engineering, repairs, restoration and small-batch production.

Materials and practical applications

Practical applications

Typical tasks include BA 0 external threads on threaded studs, screws and fasteners for precision assemblies, repairs, restoration and special small batches.

Existing external threads can be recut if the thread system, dimensions and condition permit. This does not restore missing material or severely damaged thread turns.

Suitable materials

The HSS version is intended for general use in readily machinable, non-abrasive materials up to 800 N/mm² (Technical information on round dies, PDF).

MaterialSuitabilityRecommended coolant and lubricant
Unalloyed steels; tensile strength < 800 N/mm²suitableCutting oil, including oil with lubricity-enhancing additives, or emulsion
Free-cutting steels, case-hardening steels and heat-treated steels; tensile strength < 800 N/mm²conditionally suitableCutting oil, including oil with lubricity-enhancing additives, or emulsion
Brass, long-chippingconditionally suitableThread-cutting oil for non-ferrous metals or emulsion
Aluminium, long-chippingconditionally suitableThread-cutting oil for non-ferrous metals or emulsion

Dimensions

Round die drawing with nominal thread diameter d, outside diameter D and thickness E
Nominal thread diameter d6.00 mm
Die outside diameter D20.60 mm
Die thickness E6.35 mm

Tool design

  • Standard: BS 1127
  • Tool material: HSS – high-speed steel
  • Product type: Round die
  • Design: Form A, split
  • Thread type: British Association (BA)
  • Thread standard: BS 93
  • Thread size: BA 0 × 25.4 TPI
  • Thread pitch: 1.00 mm
  • Threads per inch: 25.4
  • Thread tolerance: medium
  • Thread direction: Right-hand thread

Form A – split

The slot allows slight adjustment of the cutting diameter in a suitable die holder. The BA thread has a flank angle of 47.5° and must not be treated as a metric ISO thread.

The technical information distinguishes between Form A (split) and Form B (solid). This product is explicitly made in Form A. The general Form B delivery standard stated there therefore does not apply to this item.

Cutting external threads – step by step

  1. Prepare the workpiece
    Prepare the bolt to the recommended starting diameter of 5.90 mm and chamfer the end edge.
  2. Secure the workpiece
    Clamp the round stock securely with as little overhang as possible.
  3. Fit the die
    Fit the die in a suitable holder with the chamfered entry side facing the workpiece.
  4. Apply cutting lubricant
    For the workpiece material, use a suitable thread-cutting lubricant .
  5. Start the thread
    Position the die square to the workpiece axis and turn it in a controlled manner.
  6. Finish cutting the thread
    Continue turning evenly.
  7. Inspect the thread
    Remove chips and inspect the finished BA 0 external thread using a suitable gauge.

Further guidance is available in the VÖLKEL blog article Cut external threads cleanly by hand using a die.

Scope of delivery

  • Round die BS 1127 HSS – BA 0 × 25.4, Form A, split (SW10212)

Frequently asked questions (FAQ)

What does BA 0 × 25.4 mean?

BA 0 denotes a size in the BA thread system. The nominal thread diameter is 6 mm and the thread pitch is 1 mm. This corresponds to 25.4 threads per inch (TPI).

Can I cut an M6 thread with this die?

No. Although BA 0 and M6 × 1 have the same nominal diameter and pitch, they differ in their thread profile. The flank angle is 47.5° for BA and 60° for the metric ISO thread .

What bolt diameter do I need for BA 0?

The recommended bolt diameter is 5.90 mm. Preparation guidance is available in the article Cut external threads cleanly by hand using a die.

Which die holder fits item SW10212?

The die holder must securely hold the tool, which has an outside diameter of 20.60 mm and a thickness of 6.35 mm, specified as the die thickness . Further guidance is available in the article Choosing the right die holder.

What does Form A mean for this die?

Form A denotes the split die design. It allows slight adjustment in a suitable holder. Further details are available in the technical information on round dies (PDF).

How do I start the die straight?

Clamp the bolt so that it cannot rotate and position the die square to the workpiece axis. The procedure is explained in the article Cut external threads cleanly by hand using a die.

Which materials is the HSS die intended for?

The HSS version is intended for readily machinable, non-abrasive materials up to 800 N/mm². Actual suitability depends on machinability, material condition and machining conditions.

Do I need a cutting lubricant?

Use a cutting fluidsuited to the material, for example a suitable cutting oil.

Can I recut an existing BA 0 external thread?

Minor damage to an external thread may be reworked. This type of external thread repair does not restore missing material.

Technical documents: Round dies – technical information (PDF) · VD 23 catalogue (PDF)

Further technical information: Dies in the VÖLKEL threading glossary.

Need help with selection or use?
Use the VÖLKEL contact form.

Additional information
Type of thread BA-Thread
Standard BS 1127
Form splitted version (Form A)
Material HSS
Tolerance medium
Size BA 0 x 25.4
Outer diameter 13/16
EAN 4022835890003
Item number SW10212
Thread standard BS 93
Rec. Bolt diameter 5.90 mm