Go to homepage
Go to homepage
Skip image gallery
Circular threading die with central thread and side slit for adjusting cutting diameter.
Round Dies / Hexagon Die Nuts

Round Die JIS B-4451 o/d 25.0 mm HSS - M 10 x 1.0

Item no. 90056

€11.30

in stock - more than 100 pieces available
Application
Round Die JIS B-4451 – M 10 x 1.0, HSS, o/d 25 mm

Round Die JIS B-4451 – M 10 x 1.0 (Ø 25 mm)

The round HSS die M 10 x 1.0 according to JIS B-4451 is ideal for general use on machinable materials up to 800 N/mm² as well as unalloyed and low-alloy steels. The slotted Form A ensures smooth cutting and efficient chip removal. Outside diameter: 25 mm.

Application
  • Thread cutting M 10 x 1.0 (metric ISO thread according to DIN 13)
  • For machinable materials up to 800 N/mm²
  • Suitable for unalloyed and low-alloy steels
  • For machine or hand use (with die holder)

Advantages
  • HSS for long tool life and precise cutting performance
  • Form A – slotted for optimal chip removal
  • Reliable for fine threads M 10 x 1.0
  • Ø 25 mm – compatible with standard die holders
  • Manufactured according to JIS B-4451

Step-by-Step Instructions
  1. Preparation: Clamp the workpiece, clean the surface and prepare cutting fluid.
  2. Clamping: Insert the M 10 x 1.0 die into a compatible 25 mm die holder.
  3. Alignment: Hold the tool perfectly perpendicular to the workpiece edge.
  4. Cutting: Cut with half to one full turn forward. Refresh lubrication regularly.
  5. Cleaning: Remove chips, inspect the thread and lightly oil if needed.

Technical Specifications
Thread TypeMetric ISO Thread DIN 13
StandardJIS B-4451
FormForm A – slotted
MaterialHSS
SizeM 10 x 1.0
Outer Diameter25 mm
Article Number90056
EAN4022835900566

FAQ

Which materials is the die suitable for?
For well-machinable materials up to 800 N/mm² and unalloyed or low-alloy steels.

Which die holder do I need?
A die holder for 25 mm outside diameter is required (15010).

Is the die adjustable?
Yes, Form A is slotted, allowing slight adjustment of the cutting size.

Which standard does it meet?
JIS B-4451, cutting metric ISO threads according to DIN 13.

What is the die made from?
High-quality HSS for strong durability and precision.

Questions about selection or use? Contact us via the contact form.

Additional information
Type of thread metric-fine ISO-thread
Standard JIS B-4451
Form splitted version (Form A)
Material HSS
Tolerance 6g
Size M 10 x 1.0
Outer diameter 25.0 mm
EAN 4022835900566
Item number 90056
Thread standard DIN 13
Rec. Bolt diameter 9.88 mm
Round Die JIS B-4451 – M 10 x 1.0, HSS, o/d 25 mm

Round Die JIS B-4451 – M 10 x 1.0 (Ø 25 mm)

The round HSS die M 10 x 1.0 according to JIS B-4451 is ideal for general use on machinable materials up to 800 N/mm² as well as unalloyed and low-alloy steels. The slotted Form A ensures smooth cutting and efficient chip removal. Outside diameter: 25 mm.

Application
  • Thread cutting M 10 x 1.0 (metric ISO thread according to DIN 13)
  • For machinable materials up to 800 N/mm²
  • Suitable for unalloyed and low-alloy steels
  • For machine or hand use (with die holder)

Advantages
  • HSS for long tool life and precise cutting performance
  • Form A – slotted for optimal chip removal
  • Reliable for fine threads M 10 x 1.0
  • Ø 25 mm – compatible with standard die holders
  • Manufactured according to JIS B-4451

Step-by-Step Instructions
  1. Preparation: Clamp the workpiece, clean the surface and prepare cutting fluid.
  2. Clamping: Insert the M 10 x 1.0 die into a compatible 25 mm die holder.
  3. Alignment: Hold the tool perfectly perpendicular to the workpiece edge.
  4. Cutting: Cut with half to one full turn forward. Refresh lubrication regularly.
  5. Cleaning: Remove chips, inspect the thread and lightly oil if needed.

Technical Specifications
Thread TypeMetric ISO Thread DIN 13
StandardJIS B-4451
FormForm A – slotted
MaterialHSS
SizeM 10 x 1.0
Outer Diameter25 mm
Article Number90056
EAN4022835900566

FAQ

Which materials is the die suitable for?
For well-machinable materials up to 800 N/mm² and unalloyed or low-alloy steels.

Which die holder do I need?
A die holder for 25 mm outside diameter is required (15010).

Is the die adjustable?
Yes, Form A is slotted, allowing slight adjustment of the cutting size.

Which standard does it meet?
JIS B-4451, cutting metric ISO threads according to DIN 13.

What is the die made from?
High-quality HSS for strong durability and precision.

Questions about selection or use? Contact us via the contact form.

Recommended products

All products
Die visible through a larger die.
Application consulting
Always the perfect product for your application situation
Request consulting
This website uses cookies to ensure the best experience possible. More information...