V-COIL Inserting Tool (Drive connector 3/4") M 48 x 3.0

• for installing wire thread inserts into freshly cut threads using a machine
• compatible with V-COIL and many other wire thread inserts
• optimized for use with 3/4"-mechanical drive
• ideal for repair, maintenance, and series assembly

• Thread the insert onto the tool
• Turn the wire thread insert in the thread direction

1. Prepare: Cut new thread and clean thoroughly (remove chips, oil, dirt).
2. Mount: Screw the wire thread insert fully onto the V-COIL Inserting Tool.
3. Align: Position the tool exactly at the thread entrance.
4. Insert: Turn clockwise with 3/4"-drive until the insert is correctly seated.
5. Finish: Remove the tool – the insert is securely fixed.

• Standard: Factory standard
• Nominal Size: M 48 × 3.0
• Drive: 3/4"
• Insert Size: M 48 × 3.0
• EAN: 4022835080466
• Article Number: 08046

1. Which inserts is this tool suitable for?

The tool is suitable for M 48 × 3.0 wire thread inserts – compatible with V-COIL and many other manufacturers' wire thread inserts.

2. Can the tool be used manually?

Yes, it can be used by hand – however, optimal use is with a 3/4"-ratchet or torque tool.

3. Can I remove old inserts with this tool?

No, this tool is exclusively for installation. Special removal tools are required for disassembly.

4. Does the drive pin need to be removed after installation?

For many inserts, yes. The drive pin is removed after installation using a break-off tool.

5. What happens if the insert is installed crooked?

In that case, the insert should be removed and replaced with a new one to avoid thread damage.

6. Can the insertion depth be adjusted?

Yes, the insertion depth can be precisely controlled by the screwing motion.

• 1× V-COIL Inserting Tool, 3/4", M 48 × 3.0 (Art.-Nr. 08046)