V-COIL Inserting Tool (Drive connector 3/4") M 50 x 3.0

• Installing threaded inserts into freshly cut threads using a machine
• Compatible with V-COIL and many other threaded inserts
• Optimized for use with 3/4\" drive
• Ideal for repair, maintenance, and series production

• Screw the insert onto the tool
• Turn the insert into the thread

1. Prepare: Cut the thread and clean carefully (remove chips, oil, and dirt).
2. Mount: Screw the insert completely onto the V-COIL Inserting Tool.
3. Align: Place the tool precisely at the thread entrance.
4. Insert: Turn clockwise using the 3/4\" drive until the insert is correctly positioned.
5. Finish: Remove the tool – the insert is securely fixed.

• Standard: Workshop Standard
• Nominal Size: M 50 × 3.0
• Drive: 3/4"
• Insert Size: M 50 × 3.0
• EAN: 4022835080473
• Article Number: 08047

1. Which inserts is this tool suitable for?

The tool is suitable for M 50 × 3.0 threaded inserts – compatible with V-COIL and many other manufacturers.

2. Can the tool be used manually?

Yes, it can be used by hand – optimal usage is with a ratchet or torque wrench with 3/4\" drive.

3. Can I remove old inserts with this tool?

No, this tool is exclusively for installation. Special tools are required for removal.

4. Does the drive need to be removed after installation?

Yes, for many inserts the drive is removed after installation using a break-off tool.

5. What happens if the insert is installed incorrectly?

In this case, the insert must be removed and replaced with a new one to avoid damaging the thread.

6. Can the insertion depth be adjusted?

Yes, the insertion depth can be precisely controlled by the screwing motion.

• 1× V-COIL Inserting Tool, 3/4", M 50 × 3.0 (Art.-No. 08047)