Electrical Conduit Set M 20x1.5 - M 25x1.5 | VÖLKEL
Electrical Conduit Set M 20x1.5 - M 25x1.5
This electrical conduit set is intended for cutting the conduit thread sizes named in the product name with a matched die holder and guides. You use it when conduit connections need repeatable external threads in installation and maintenance work. The set keeps the size specific tools together for fast selection on the bench or on site.
The M designation identifies metric ISO threads that are standard across general engineering, maintenance, and machine building.
- Cut external conduit threads on the sizes named in the product name with matched dies, guides, and holder parts.
- Use in electrical installation, workshop preparation, and service work where conduit threads must be reproduced consistently.
- Guide the die square to the conduit axis so the thread start is stable and the mating connection seats correctly.
- Keep holder and guide selection matched to the conduit size before the threading pass begins.
Note Use the guide matched to the conduit size so the die starts square and the thread form remains consistent.
- Matched dies, guides, and holder parts reduce setup time for conduit threading.
- Guide components support a more stable and square thread start.
- Set format keeps the required conduit sizes together for repeat work.
- Suitable for installation and repair work on conduit systems using the stated thread sizes.
Drawbacks
- The set is limited to the conduit sizes included in the product name and scope of supply.
- It is designed for the named conduit applications, not for every external thread outside that system.
- Select the conduit die and guide that match the thread size stated on the job.
- Mount the die in the holder and secure the guide so the tool starts square on the conduit.
- Prepare the conduit end by cutting it cleanly and removing burrs that would disturb the thread start.
- Apply the tool assembly square to the conduit and begin the cut with steady manual feed.
- Continue the threading pass with even torque and suitable lubrication for the conduit material.
- Back off the tool, clean the thread, and check the fit with the intended conduit connection.
- 1x Die holder 42 mm
- 1x Die guide M 20x1.5
- 1x Die guide M 25x1.5
- 1x Electrical Conduit die M 20x1.5 VÖLKEL 18002
- 1x Electrical Conduit die M 25x1.5 VÖLKEL 18003
- Product type: Electrical conduit threading set
- Thread system: M
- Covered sizes: M 20x1.5 - M 25x1.5
- Included groups: die guides and die holders
- How do you choose the correct conduit die from the set?
Match the conduit size on the job to the die and guide in the set before the threading pass begins.
- Why are guides important in conduit threading?
The guide helps the die start square on the conduit so the thread form stays consistent and the mating connection seats correctly.
- Can you use the set for repeat installation work?
Yes. The set format is suited to recurring conduit sizes in installation and maintenance work where matched components are helpful.
- Where can you read more about round dies and external thread cutting?
Technical information round dies as PDF
- What should you inspect after cutting the thread?
Inspect thread form, cleanliness, and fit with the intended mating connection before the conduit enters service.
- Where can you find the full threading tools catalog?
VD 23 catalog as PDF
- Is this set intended for every external thread system?
No. It is intended for the conduit threading tasks and sizes defined by the set contents and product name.
Do you need help selecting or using the product?
Use the contact form.
