Tang Break Tool No. 2

• for removing the driving tang after a V-COIL wire thread insert has been installed
• for thread repair work where the tang must be cleared before screw assembly
• for workshop use after the insert sits below or flush with the required installation position

Note Use the tang break tool only after the insert is correctly positioned in the repaired internal thread.

• The tool addresses the final tang removal step after insert installation.
• A dedicated tang break tool reduces uncontrolled impact on the repaired internal thread.
• Numbered tool selection helps match the tool to the intended V-COIL repair range.
• The process separates insertion from tang removal, which supports clean workflow control.

• The tool only removes the tang after installation, so use inserting and extraction tools separately for those process stages.

1. Confirm that the wire thread insert is fully installed in the prepared receiving thread.
2. Align the tang break tool with the installed insert and the thread axis.
3. Apply a controlled breaking movement to remove the tang.
4. Remove the broken tang from the hole or component.
5. Check that the first usable thread turns are clear before assembly.
6. Inspect the repaired thread according to your workshop release process.

• 1 piece Tang Break Tool No. 2

• Product type: tang break tool
• Thread designation: Nr. 2
• Standard: Werksnorm
• Size range: Nr. 2
• Package quantity: 1

When do you use a tang break tool?

Use it after the wire thread insert is installed and the driving tang has to be removed from the repaired thread.

How do you choose the correct tang break tool?

Choose it by the numbered V-COIL tool range and the insert size used in the repair process.

Can it install a V-COIL insert?

No, it removes the tang only and does not replace the inserting tool.

What should you check after tang removal?

Check that the tang has been removed from the hole and that the first usable thread turns are clear for assembly.

Where can you find V-COIL repair information?

Additional V-COIL repair guidance is available here: Technical information V-COIL thread repair as PDF

Can the tool correct an incorrectly installed insert?

No, use a V-COIL extracting tool for insert removal and inspect the receiving thread before replacing the insert.

Where can you find the V-COIL catalog?

You can find the thread repair catalog here: VC 23 catalog as PDF