HexTap VX impact tap bit with 11 mm hex shank – M 27 x 3.0

• Thread cutting with an impact wrench via the matching Adapter 3/4" x 11 mm.
• For general use in easily machinable materials up to 900 N/mm².
• For unalloyed and low-alloy materials.
• Chamfer form B (spiral point) for through holes.
• For use in steel construction, mechanical engineering, assembly and maintenance.

Note Prepare the core hole with a diameter of 24 mm and position the tap straight in line with the hole axis.

• Thread cutting directly with the impact wrench – fast and powerful.
• 11 mm hexagon drive for a secure connection via the adapter.
• Ground from solid HSS-E.
• TiAlN coating for increased service life and better cutting results.
• Uniform 11 mm drive from M 8 to M 30: one adapter per impact wrench size is all you need.

Limitations

• Designed for through holes, not for blind holes.
• Not intended for high-alloy or difficult-to-machine materials above 900 N/mm².

1. Drill the core hole with a diameter of 24 mm.
2. Push the Adapter 3/4" x 11 mm fully onto the drive of the impact wrench.
3. Insert the HexTap VX with its 11 mm hexagon into the adapter as far as it will go.
4. Apply a suitable cutting fluid, for example VÖLKEL Cutting Oil N3S.
5. Position the tap at a right angle and cut the thread through the workpiece with controlled force.
6. Switch to reverse, back the tap out and remove the chips.
7. Check the thread with a screw or a thread gauge.

• 1 × VÖLKEL HexTap VX M 27 x 3.0

• Product type: Impact tap bit
• Thread: metric ISO thread M 27 x 3.0 to DIN 13
• Tolerance: ISO2 (6H)
• Drive: 11 mm hexagon
• Matching adapter: 3/4" x 11 mm (Art. No. 10913)
• Cutting material: HSS-E, ground, solid material
• Coating: TiAlN
• Chamfer: form B (spiral point), straight fluted
• Core hole diameter: 24 mm
• Overall length: 130 mm
• Thread length: 48 mm
• Article number: 68076
• EAN: 4022835680765

Which impact wrench do I need for the HexTap VX M 27 x 3.0?
An impact wrench with 3/4" drive, connected via the Adapter 3/4" x 11 mm (Art. No. 10913).

Which core hole do I need?
For M 27 x 3.0, the core hole diameter is 24 mm.

Can I use the HexTap VX for blind holes?
No, with chamfer form B it is designed for through holes.

Which materials is the HexTap VX suitable for?
For easily machinable, unalloyed and low-alloy materials up to 900 N/mm².

Which cutting fluid is suitable?
A cutting fluid suitable for thread machining, for example VÖLKEL Cutting Oil N3S.

Which sizes are available?
The HexTap VX is available from M 8 to M 30. Up to M 16 you use the Adapter 1/2" x 11 mm, from M 18 the Adapter 3/4" x 11 mm.