Adapter 3/4"x11 mm

• Connects impact wrenches with 3/4" drive to HexTap VX impact tap bits with 11 mm hexagon drive.
• Intended for HexTap VX in sizes M 18 to M 30.
• For cutting threads in through holes in easily machinable, unalloyed and low-alloy materials up to 900 N/mm² – the application range of the HexTap VX.
• For use in steel construction, mechanical engineering, assembly and maintenance.

Note The adapter is not a cutting tool. It transmits the torque from the impact wrench to the HexTap VX. Always position the tool straight in line with the hole axis.

• Thread cutting directly with the impact wrench – fast and powerful.
• Secure connection between 3/4" square and 11 mm hexagon.
• Fits all HexTap VX from M 18 to M 30.
• Quick change of thread size: you only swap the HexTap VX, the adapter stays on the impact wrench.
• Compact accessory for the workshop, assembly and building sites.

Limitations

• For HexTap VX from M 8 to M 16, the Adapter 1/2" x 11 mm is intended, used with an impact wrench with 1/2" drive.

1. Choose the HexTap VX that matches the thread size and prepare the core hole. You can find the core hole diameter on the product page of each HexTap VX.
2. Push the adapter with its 3/4" square drive fully onto the drive of the impact wrench.
3. Insert the HexTap VX with its 11 mm hexagon into the adapter as far as it will go.
4. Apply a suitable cutting fluid, for example VÖLKEL Cutting Oil N3S.
5. Position the tool at a right angle to the hole and cut the thread with controlled force.
6. Switch to reverse, back the tap out and remove the chips.
7. Clean the adapter and drives after use and check them for wear.

• 1 × VÖLKEL Adapter 3/4" x 11 mm

• Product type: Adapter for impact wrenches
• Drive side: 3/4" square, for impact wrenches with 3/4" drive
• Tool side: 11 mm hexagon, for HexTap VX
• Suitable for: HexTap VX M 18 to M 30
• Article number: 10913
• EAN: 4022835109136

These HexTap VX fit the Adapter 3/4" x 11 mm:

• HexTap VX M 18 x 2.5 – Art. No. 68062
• HexTap VX M 20 x 2.5 – Art. No. 68066
• HexTap VX M 22 x 2.5 – Art. No. 68070
• HexTap VX M 24 x 3.0 – Art. No. 68074
• HexTap VX M 27 x 3.0 – Art. No. 68076
• HexTap VX M 30 x 3.5 – Art. No. 68078

Which taps is the Adapter 3/4" x 11 mm intended for?
For the HexTap VX impact tap bits with 11 mm hexagon drive in sizes M 18 to M 30.

Which impact wrench do I need?
An impact wrench with 3/4" drive.

Which adapter do I need for M 8 to M 16?
The Adapter 1/2" x 11 mm (Art. No. 10912) for impact wrenches with 1/2" drive.

Do other HexTap bits fit?
The adapter is designed for tools with an 11 mm hexagon drive such as the HexTap VX. HexTap S bits with 1/4" hexagon drive do not fit.

Which cutting fluid is suitable?
A cutting fluid suitable for thread machining, for example VÖLKEL Cutting Oil N3S.

How do I look after the adapter?
Keep the drives clean and check the square and hexagon regularly for wear.