Skip to main content Skip to search Skip to main navigation
Application
VÖLKEL Hand Tap Finisher M10x1.25 HSS-G DIN 2181

VÖLKEL Hand Tap Finisher DIN 2181 HSS-G - M 10 x 1.25

The VÖLKEL hand tap finisher according to DIN 2181 is made of premium HSS-G (ground high-speed steel) and designed for precise metric ISO fine threads M10 x 1.25. It is widely used for grease fitting and lubrication head threads. Optimized for manual use, suitable for through and blind holes in unalloyed and low-alloy steels up to 900 N/mm².

Application & Benefits

This hand tap delivers reliable results in these areas:

  • Specifically for grease fitting and lubrication head threads.
  • General-purpose use in metalworking workshops.
  • Best suited for machinable steels up to 900 N/mm².
  • Effective for both through and blind holes.
  • Produces metric fine threads per DIN 13; tool manufactured to DIN 2181.

Step-by-Step Guide (Hand Tapping)

  1. Preparation: Drill the correct core hole, deburr carefully, and verify size accuracy.
  2. Clamping: Place the tap securely in a wrench; align it square to the hole.
  3. Lubrication: Apply cutting oil liberally to tool and hole.
  4. Starting: Engage the tap clockwise until it cuts smoothly.
  5. Tapping: Rotate steadily, keeping the tap aligned and lubricated.
  6. Finishing: Once depth is achieved, reverse out carefully counter-clockwise.
  7. Cleaning & Inspection: Remove chips, clean the thread, and verify with a gauge or fitting.

Technical Specifications (M 10 x 1.25)

  • Thread type: Metric ISO fine thread DIN 13
  • Standard: DIN 2181
  • Material: HSS-G (ground high-speed steel)
  • Tolerance: ISO 2 / 6H
  • Size: M 10 x 1.25
  • Overall length (L1): 70 mm
  • Thread length (L2): 24 mm
  • Shank diameter (D2): 7 mm
  • Square drive: 5.5 mm
  • Article number: 26338-2
  • Application: Hand tapping; through & blind holes; steels up to 900 N/mm²

Frequently Asked Questions (FAQ)

Q1: What is this tap mainly used for?

A1: Especially for grease fitting and lubrication head threads and other fine pitch thread applications.

Q2: What does DIN 2181 stand for?

A2: It is the standard for hand taps (taper, intermediate, finisher) defining dimensions and tolerances for metric ISO threads.

Q3: Why choose HSS-G material?

A3: It provides higher accuracy, smoother threads, and better tool life compared to conventional HSS taps.

Q4: Is this tap designed for machine use?

A4: No, it is primarily intended for manual tapping; machine use is not recommended.

Q5: Which materials can it cut?

A5: Unalloyed and low-alloy steels up to 900 N/mm² tensile strength.

Do you have specific questions about using this hand tap or need advice on other thread types? We are happy to help! Contact us anytime via our contact form.

Additional information
Type of thread metric-fine ISO-thread
Standard DIN 2181
Material HSS-G
Tolerance ISO2 (6H)
Size M 10 x 1.25
Overall length (L1) 70 mm
Thread length (L2) 24 mm
Core hole diameter (D1) 8.8 mm
Shank diameter (D2) 7.0 mm
Drive connector 5.5 mm
Item number 26338-2
Type of flute straight fluted
Application for through and blind holes
Thread standard DIN 13
VÖLKEL Hand Tap Finisher M10x1.25 HSS-G DIN 2181

VÖLKEL Hand Tap Finisher DIN 2181 HSS-G - M 10 x 1.25

The VÖLKEL hand tap finisher according to DIN 2181 is made of premium HSS-G (ground high-speed steel) and designed for precise metric ISO fine threads M10 x 1.25. It is widely used for grease fitting and lubrication head threads. Optimized for manual use, suitable for through and blind holes in unalloyed and low-alloy steels up to 900 N/mm².

Application & Benefits

This hand tap delivers reliable results in these areas:

  • Specifically for grease fitting and lubrication head threads.
  • General-purpose use in metalworking workshops.
  • Best suited for machinable steels up to 900 N/mm².
  • Effective for both through and blind holes.
  • Produces metric fine threads per DIN 13; tool manufactured to DIN 2181.

Step-by-Step Guide (Hand Tapping)

  1. Preparation: Drill the correct core hole, deburr carefully, and verify size accuracy.
  2. Clamping: Place the tap securely in a wrench; align it square to the hole.
  3. Lubrication: Apply cutting oil liberally to tool and hole.
  4. Starting: Engage the tap clockwise until it cuts smoothly.
  5. Tapping: Rotate steadily, keeping the tap aligned and lubricated.
  6. Finishing: Once depth is achieved, reverse out carefully counter-clockwise.
  7. Cleaning & Inspection: Remove chips, clean the thread, and verify with a gauge or fitting.

Technical Specifications (M 10 x 1.25)

  • Thread type: Metric ISO fine thread DIN 13
  • Standard: DIN 2181
  • Material: HSS-G (ground high-speed steel)
  • Tolerance: ISO 2 / 6H
  • Size: M 10 x 1.25
  • Overall length (L1): 70 mm
  • Thread length (L2): 24 mm
  • Shank diameter (D2): 7 mm
  • Square drive: 5.5 mm
  • Article number: 26338-2
  • Application: Hand tapping; through & blind holes; steels up to 900 N/mm²

Frequently Asked Questions (FAQ)

Q1: What is this tap mainly used for?

A1: Especially for grease fitting and lubrication head threads and other fine pitch thread applications.

Q2: What does DIN 2181 stand for?

A2: It is the standard for hand taps (taper, intermediate, finisher) defining dimensions and tolerances for metric ISO threads.

Q3: Why choose HSS-G material?

A3: It provides higher accuracy, smoother threads, and better tool life compared to conventional HSS taps.

Q4: Is this tap designed for machine use?

A4: No, it is primarily intended for manual tapping; machine use is not recommended.

Q5: Which materials can it cut?

A5: Unalloyed and low-alloy steels up to 900 N/mm² tensile strength.

Do you have specific questions about using this hand tap or need advice on other thread types? We are happy to help! Contact us anytime via our contact form.

Die visible through a larger die.
Application consulting
Always the perfect product for your application situation
Request consulting