Short Machine Tap with interrupted threads DIN 352 Form B HSSE - M 3 x 0.5 | VÖLKEL
Short Machine Tap with interrupted threads DIN 352 Form B HSSE - M 3 x 0.5
Choose this DIN 352 short machine tap with interrupted threads when you want a compact tool with a distinct cutting profile stated in the product name.
With DIN 352 as the dimensional reference, this tap focuses on a compact format. The interrupted thread execution defines the cutting profile.
- Create metric ISO internal threads in steel and comparable alloys, depending on the workpiece condition and cutting fluid.
- Use when an interrupted thread execution is specified for the process or the material behavior.
- Suitable when you want a special cutting profile stated in the product name for differentiation.
- Applied in repair and production environments where controlled threading is required.
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: thread cutting, re tapping, and thread cleaning depending on condition
Note Keep alignment stable and use appropriate cutting fluid. If torque rises, stop and clear chips to avoid tool damage.
- Interrupted thread execution provides the specified cutting profile
- Short DIN 352 pattern supports compact setups
- HSSE tool material supports robust cutting edges
- Metric ISO thread focus supports common fastener systems
- Supports internal threading when process conditions are controlled
Drawbacks
- Not suitable for very hard or highly abrasive materials, depending on execution
- Not intended for high performance tapping without rigid guidance and controlled coolant
- Confirm the required thread specification before you start.
- Create a clean pilot hole and ensure enough depth for the thread.
- Secure the workpiece and align the tool axis to the hole.
- Clamp the tap in a suitable holder.
- Apply suitable lubrication for cutting.
- Tap with controlled feed and avoid sudden speed changes.
- Stop if you notice abnormal torque and clear chips.
- Remove the tap, clean the thread, and verify fit.
- 1 piece short machine tap with interrupted threads in the selected size
- Tool type: Short machine tap
- Standard: DIN 352
- Chamfer: Form B
- Interrupted threads: Yes
- Material: HSSE
- Nominal size: M 3 x 0.5
- Thread type: Metric ISO thread, depending on execution
- Tolerance class: Depending on execution
- Coating: Depending on execution
- What does interrupted threads mean on a tap?
It indicates a special execution where the cutting profile is not continuous along the full circumference. Effects depend on design, but the key point is that you use the execution specified by the process.
- How do you decide between the standard short machine tap and the interrupted thread execution?
Use the interrupted thread execution when it is specified for the job or when you have process evidence that it improves stability in your material. Otherwise use the standard execution that matches your shop practice.
- Can you use the tool in the size M 3 x 0.5 by hand and in a machine?
Yes, depending on your holder and setup you can drive the tool by hand or with a machine. Focus on alignment, lubrication, and controlled torque to protect the cutting edges.
- What lubrication should you use for thread cutting?
Use a cutting fluid suitable for the workpiece material and the tapping method. Stable lubrication supports surface quality and helps control torque.
- How do you know when the tap is worn?
Typical signs are rising torque, rough thread flanks, and inconsistent fit with the mating part. Replace the tap if the cutting edges look rounded or chipped.
- Where can you find technical background on short machine taps and selection criteria?
Use this document for selection guidance and general process parameters: Technical information short machine taps as PDF.
- Can you run this tap in a machine and in a hand setup?
Yes, depending on your holder and setup you can drive the tool by hand or with a machine. Focus on alignment, lubrication, and controlled torque to protect the cutting edges.
- Where can you find the VÖLKEL threading tools catalog for additional sizes and executions?
For the full overview use: VD 23 catalog as PDF.
Do you need help selecting or using the product?
Use the contact form.
