Hand Tap set of 3 pieces JIS B-4430 HSS-G - M 22 x 1.5

• cutting or reworking internal M 22 x 1.5 threads where the drawing or mating part requires this exact designation
• The set covers the rougher, intermediate, and finisher stages for a controlled three stage manual tapping sequence.
• right hand thread work in manual tapping setups and controlled repair operations
• selection by JIS B-4430 tool dimensions and the stated thread standard where applicable
• metric internal thread production in workshop, assembly, or service environments
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: thread cutting, re tapping, and thread cleaning depending on condition

Note Match M 22 x 1.5, tap stage, thread direction, holder fit, and hole preparation before the tool enters the workpiece.

• HSS-G cutting material is stated in the product data and supports selection by material execution instead of appearance
• JIS B-4430 dimension reference helps you compare the tool with drawings, stock systems, and existing tool lists
• tolerance class ISO2 (6H) gives a clear selection reference for the internal thread requirement
• set structure keeps the required hand tap stages together for M 22 x 1.5
• staged manual cutting reduces the need to force a single tap through the full thread profile

• The product is only correct for M 22 x 1.5 and the stated tap stage; use another item from Threading tools if thread, direction, or stage differs.

1. Confirm that the component requires M 22 x 1.5 and that thread direction matches the selected tool.
2. Prepare the tapping hole and secure the workpiece so the tap can enter square to the surface.
3. Select a suitable tap wrench or guided driving setup for the tap shank.
4. Start with the rougher tap from the set and keep the tap square to the hole axis.
5. Apply suitable cutting oil before the cutting edges engage the workpiece.
6. Turn steadily and remove chips from the flutes at controlled intervals.
7. Continue with the intermediate tap and then the finisher tap in sequence.
8. Clean the thread and verify the result with the mating part or an appropriate inspection method.

• 1 set of 3 pieces Hand Tap set of 3 pieces JIS B-4430 HSS-G - M 22 x 1.5

• Product type: 3 piece hand tap set
• Standard: JIS B-4430
• Cutting material: HSS-G
• Thread system: metric fine thread
• Thread designation: M 22 x 1.5
• Thread standard: DIN 13
• Tolerance class: ISO2 (6H)
• Thread direction: right hand
• Core hole diameter from product data: 20.5 mm
• Overall length L1: 95 mm
• Thread length L2: 45 mm
• Shank diameter D2: 17 mm
• Square k: 13 mm
• Packaging unit: 1

Which exact thread is this product for?

This product is for M 22 x 1.5. Metric fine threads use a smaller pitch than the comparable coarse metric size and are selected when the drawing or mating part specifies that pitch. The referenced thread standard is DIN 13.

Is this product for internal or external threads?

This product is for internal threads. Use a round die when the workpiece needs an external thread.

How do you choose the correct tap stage?

Choose the stage by the manual tapping sequence. The set covers the rougher, intermediate, and finisher stages for a controlled three stage manual tapping sequence.

What should be checked before ordering?

Check thread system, size, pitch, standard, tolerance class where specified, and tap stage against the drawing or existing component.

Where can you find technical background for hand taps?

Use the Technical information hand taps as PDF.

Can this product be used for repair or thread cleaning?

Use it for re tapping or cleaning only when the existing internal thread is M 22 x 1.5 and the thread condition still allows controlled cutting.

How do you avoid selecting the wrong metric pitch?

Compare nominal diameter and pitch together. A metric fine thread and a metric coarse thread with the same nominal diameter are not interchangeable.

Where can you find the matching VÖLKEL threading tool catalog?

Use the VD 23 catalog as PDF.