Hand Tap set of 2 pc DIN 2181 HSS-G - M 74 x 1.5 | VÖLKEL
Hand Tap set of 2 pieces DIN 2181 HSS-G - M 74 x 1.5
You use this hand tap set for manual internal thread production or reworking when the specified thread from the product name must be maintained. It is suited to workshop benches, maintenance jobs, and repair work where you want controlled alignment with a tap wrench. The set configuration in the product name already tells you the manual tapping sequence available.
The M designation identifies metric ISO threads that are standard across general engineering, maintenance, and machine building. HSS-G indicates a ground high speed steel tool, which is typically selected when you want accurate geometry and a clean cutting action.
- Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
- Select the tool by the thread system, size, and form stated in the product name before the job begins.
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: thread cutting, re tapping, and thread cleaning depending on condition
- Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.
Note Confirm thread designation, holder concept, and workpiece condition before you start the operation.
- Manual control helps when machine tapping is not practical.
- The set sequence supports thread starting and follow up stages in order.
- Ground or HSSE tool execution supports precise geometry and dependable cutting behavior.
- Suitable for repair benches, maintenance work, and smaller lot sizes.
Drawbacks
- Manual threading is slower than a dedicated machine process in repetitive production work.
- It is intended for controlled manual work, not for high throughput automated production.
- Match the hand tap set to the thread designation shown on the drawing and in the product name.
- Prepare the hole and secure the workpiece so the tap can start square to the surface.
- Mount the first tap stage in a suitable tap wrench and align it carefully by hand.
- Advance the tool with steady torque and maintain alignment as the thread starts.
- Continue with the following tap stage from the set if the sequence requires it for the final thread form.
- Withdraw the tool, remove chips from the hole, and check the finished thread with the intended mating part.
- 2 pieces Hand Tap set of 2 pieces DIN 2181 HSS-G - M 74 x 1.5
- Product type: Hand tap set
- Thread system: M
- Standard: DIN 2181
- Tool material: HSS-G
- How do you choose the correct product variant?
Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.
- How do you decide whether the product fits your process?
Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.
- What should you inspect before the threading operation?
Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.
- Where can you read more about hand tapping?
Technical information hand taps as PDF
- Can you use this product for repair work as well as new threads?
In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.
- Where can you find the full threading tools catalog?
VD 23 catalog as PDF
- What is the main selection checkpoint after size matching?
After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or external thread condition.
Do you need help selecting or using the product?
Use the contact form.
