Hand Tap set of 2 pieces DIN 2181 HSS-G - M 95 x 3.0

• Cut or restore internal metric threads with the designation M 95 x 3.0 in manually controlled workshop processes.
• Use the 2 piece set where DIN 2181 hand taps and HSS-G execution match the required thread data.
• Work in repair, maintenance, and small batch applications where alignment and controlled feed are more important than cycle time.
• Select a suitable tap wrench by tool shank and workshop capacity without forcing the tap into a holder that does not guide it securely.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: thread cutting, re tapping, and thread cleaning depending on condition

Note Use the correct tapping drill size from your process data and keep the tap aligned with the bore axis during every cut.

• The 2 piece set supports staged hand tapping for the M 95 x 3.0 internal thread.
• DIN 2181 gives a clear product standard reference for the hand tap set.
• HSS-G identifies the ground high speed steel execution stated in the product name.
• Manual control helps you feel rising torque during repair work before tool overload occurs.

• Manual tapping is slower than a validated machine tapping process for repeated production parts.
• A hand tap can cut an inaccurate thread if the holder is not kept square to the bore axis.

1. Confirm that the required internal thread is M 95 x 3.0.
2. Prepare the core hole according to the drawing or your tapping drill reference.
3. Deburr the bore entry so the first tap can start square to the surface.
4. Clamp the first tap in a suitable tap wrench.
5. Align the tap with the bore axis before the first cutting movement.
6. Cut with steady torque and use suitable cutting lubricant for the material.
7. Clean chips from the bore and tap before changing to the next tap.
8. Finish the thread with the second tap from the set.
9. Inspect the finished thread with the specified fastener or gauge.

• 2 pieces Hand Tap set of 2 pieces DIN 2181 HSS-G - M 95 x 3.0

• Product type: Hand tap set
• Set content: 2 pieces
• Standard: DIN 2181
• Tool material or execution: HSS-G
• Thread system: Metric ISO
• Thread designation: M 95 x 3.0

When is a hand tap set the right choice for this product?

Use a hand tap set when the thread must be cut or restored manually and the workpiece can be aligned securely without machine guidance.

What does the metric M designation mean for selection?

The M designation identifies an ISO metric thread, so M 95 x 3.0 must match the drawing, existing component, and intended fastener.

Where can you find technical information for hand taps?

Technical information hand taps as PDF

How do you reduce the risk of a crooked internal thread?

Keep the tap wrench square to the bore axis, start carefully, and stop if rising torque indicates alignment or chip evacuation problems.

Do you use the same hand tap set for through holes and blind holes?

Check the component geometry before cutting because hole depth, chip space, and thread depth determine how the taps can be used safely.

What should you check before ordering this hand tap set?

Check M 95 x 3.0, the DIN 2181 reference, the HSS-G execution, and whether your holder can clamp the tap securely.

Where can you find more threading tool product information in a catalog?

VD 23 catalog as PDF