Tap and die sets: everything in one case
A tap and die set brings together taps, dies, tapping drills and holders for one size range, for example M 3 to M 12, UNC 1/4 to 1/2 or BSW 1/8 to 1/2. VÖLKEL offers around 280 sets: classic hand tap sets with and without dies, machine tap sets, TwinBoxes with tap and matching twist drill, combination taps and HexTap sets for the cordless drill, and assortments by thread system.
P.V.2 Hand taps, serial (3 pcs. per size) and round dies (set of 54 pcs.) M 3 – M 20
Which set suits you?
For workshop and assembly: hand taps and dies
The P.V. sets contain three-piece hand tap sets, round dies, tap wrench, die holder and usually the tapping drills as well. The P.V.1 with 43 pieces covers M 3 to M 12 completely, the P.V.23 with 30 pieces concentrates on the taps. For left-hand threads, fine threads, UNC/UNF and BSW/BSF there are dedicated compositions in the assortments.
For the machine: TwinBox and machine tap sets
The TwinBox 2in1 combines a machine tap with the exactly matching twist drill, one box per size. It is available as standard, as green, blue, white and red ring by material, and as HexDrive version. The machine tap sets P.K. cover M 3 to M 12 in form B or form C.
For the cordless drill: HexTap, combination bits and Q.C. boxes
HexTap sets contain double-ended taps with hexagon drive that combine taper and bottoming tap in one tool. Combination taps drill, cut and deburr through-hole threads up to 1 x D in one operation. What the HexTap can do is in HexTap: the solution for difficult threads.
Special sets
Ready-made sets exist for grease nipples, wheel studs and wheel nuts, sanitary threads and electrical conduit. Examples: the grease nipple set and the sanitary set. For thread repair with wire thread inserts, the matching sets are under thread repair kits.
